Balanced Audio Technology VK-1000 Owner's Manual - page 4
Physical Placement
It is recommended that you provide for at least 6" of free space around the unit for proper
ventilation.
Mount the unit on a hard surface with proper ventilation underneath.
Do not stack the VK-1000 power amplifier on top of other units, nor vice versa.
IMPORTANT NOTES
:
To assure reliable operation always turn the VK-1000 OFF while making or changing
input or speaker connections. No connections should be made while the
amplifier is ON.
If the VK-1000 was turned OFF for any reason, wait at least 30 seconds before
turning it back ON.
Power Connection
The VK-1000 is a monoblock design with two separate power cord connections. Due to the
amplifier’ high power rating, it is important to assure the good quality power line for each
power cord. If separate circuit outlets are used for the power cords 1 and 2, it is
recommended that both circuits be connected to the same phase of the power line.
Otherwise, a high level of hum can be present.