Balanced Audio Technology VK-220 Owner's Manual - page 7
Fuse Protection:
The circuitry of the VK-220 is protected by the main line fuse that is located on the back
panel. This fuse should be checked if the front panel LED’s fail to light.
CAUTION:
Make sure that the VK-220 is turned OFF and disconnected from the power line
before checking or replacing fuses.
A blown fuse in the VK-220 is an indication of a serious problem. If a replacement fuse fails
as well, no further attempts at servicing the unit should be undertaken. Please contact the
factory for professional service.
Fuse Ratings
The proper ratings for the main line fuse are as follows:
For 100-120 VAC Units:
15A 250V Slow Blow
For 200-240 VAC Units:
10A 250V Slow Blow
Factory supplied fuses should be only replaced with the same type and rating parts.
Servicing
The Balanced Audio Technology VK-220 should not require service to maintain its high
performance. In case of malfunction, if replacing fuses fails to eliminate the problem, please
direct any further service inquiries to the factory.
Five Year Limited Warranty