Balanced Audio Technology VK-250M Owner's Manual

Summary of VK-250M

  • Page 1

    Vk-250m warranty registration form unit serial number: _______________________________________ customer name: _______________________________________ address: _______________________________________ _______________________________________ date of purchase: _______________________________________ pur...

  • Page 2: Vk-250 Balanced Monoblock

    Vk-250 balanced monoblock owner's manual 1300 first state blvd. Suite a w ilmington, de 19804 tel: 302-999-8855 fax: 302-999-8818.

  • Page 3

    Introduction thank you for your purchase of the balanced audio technology vk-250 balanced power amplifier. Please read this owner's manual to obtain the full benefit of the vk-250 in your system. It will provide you with the needed safety information and operating procedures for this exceptional uni...

  • Page 4

    Physical placement it is recommended that you provide for at least 6" of free space around the unit for proper ventilation. Mount the unit on a hard surface with proper ventilation underneath. Do not stack the vk-250 power amplifier on top of other units, nor vice versa. Important notes : to assure ...

  • Page 5

    Balanced components use balanced xlr interconnects to connect the vk-250 to a balanced preamplifier. Input connectors are clearly marked on the back panel. Note: the vk-250 input xlr connectors are wired as follows: pin 1: common/shield pin 2: positive pin 3: negative single-ended components single-...

  • Page 6

    Operating the vk-250 turning the vk-250 on: the power switch is located on the vk-250 front panel. If vk-250 was turned off even for a short period of time, you should wait at least 30 seconds before turning it back on. This precaution will minimize the stress on internal components. When you turn t...

  • Page 7

    Fuse protection: the circuitry of the vk-250 is protected by the following fuses: 1. The main line fuse is located on the back panel. This fuse should be checked if the front panel led’s fail to light. 2. Two internal fuses are mounted on each of the two amplifier circuit boards. These fuses have tw...

  • Page 8

    Five year limited warranty terms and conditions 1. Limited warranty upon receipt of the attached warranty registration form, balanced audio technology warrants the purchased product to be free from manufacturing, materials, and workmanship defects for five years from date of original purchase, excep...