Balanced Audio Technology VK-600M Owner's Manual - page 4
Physical Placement
It is recommended that you provide for at least 6" of free space around the unit for proper
ventilation.
Mount the unit on a hard surface with proper ventilation underneath.
Do not stack the VK-600 power amplifier on top of other units, nor vice versa.
IMPORTANT NOTES
:
To assure reliable operation always turn the VK-600 OFF while making or changing
input or speaker connections. No connections should be made while the
amplifier is ON.
If the VK-600 was turned OFF for any reason, wait at least 30 seconds before
turning it back ON.
Power Connection
The VK-600 is a true Dual Monoblock design with two separate power cords. Due to the
amplifier’ high power rating, it is important to assure the good quality power line for each
channel. If separate circuit outlets are used for left and right channels, it is recommended that
both circuits be connected to the same phase of the power line. Otherwise, a high level of
hum can be present.
Input Connections
Best results will be obtained when connecting the VK-600 to a balanced preamplifier.
However, the VK-600 is designed to accept either balanced or single-ended inputs.
Monoblock connection: On the VK-600M Balanced Monoblock either the left or right
channel input can be used – both will produce identical results.