Balanced Audio Technology VK-6200 Owner's Manual

Manual is about: Multi-Channel Power Amplifier

Summary of VK-6200

  • Page 1

    Vk-6200 warranty registration form unit serial number: _______________________________________ customer name: _______________________________________ address: _______________________________________ _______________________________________ date of purchase: _______________________________________ pur...

  • Page 2: Vk-6200

    Vk-6200 multi-channel power amplifier owner's manual 1300 first state blvd. Suite a w ilmington, de 19804 tel: 302-999-8855 fax: 302-999-8818.

  • Page 3

    Introduction thank you for your purchase of the balanced audio technology vk-6200 balanced power amplifier. Please read this owner's manual to obtain the full benefit of the vk-6200 in your system. It will provide you with the needed safety information and operating procedures for this exceptional u...

  • Page 4

    Physical placement it is recommended that you provide for at least 6" of free space around the unit for proper ventilation. High power amplifiers like vk-6200 benefit from extra ventilation around them. Providing unobstructed air flow around the unit will assure cooler operation of its internal comp...

  • Page 5

    Operating the vk-6200 turning the vk-6200 on: the power switch is located in the center of the front panel of the vk-6200. Pressing on the top of switch bar will turn the unit on and off, provided the vk-6200 is not in its standby mode (see below for operation in standby mode). Front panel indicator...

  • Page 6

    Green standby indicator: the green indicator comes on when the unit is in its standby mode. In this case, pressing the power switch will make the unit alternate between off and standby states. Note: vk-6200 is automatically switched into its standby mode when a remote control plug is installed in th...

  • Page 7

    Remote control connectors: the vk-6200 is equipped with remote in and out connectors mounted on its back panel. These allow the amplifier be turned on remotely from any controller equipped with +12v trigger signal output. The external +12v trigger voltage should be applied to the remote in connector...

  • Page 8

    Servicing the balanced audio technology vk-6200 does not require periodic service to maintain its high performance. In case of malfunction, (when replacing fuses fails to eliminate the problem) please direct any further service inquiries to the factory. Cleaning to remove dust, occasionally wipe the...

  • Page 10

    Five year limited warranty terms and conditions 1. Limited warranty upon receipt of the attached warranty registration form, balanced audio technology warrants the purchased product to be free from manufacturing, materials, and workmanship defects for five years from date of original purchase, subje...