Balanced Audio Technology VK-P10SE Owner's Manual - page 5
Reseating Tubes
Normally, reseating tubes upon delivery is not required. However, if any tubes have
noticeably drifted out of position due to unusually high transportation stress, it will be
advisable to reseat the tubes. Use the supplied Torx wrench to remove the top cover.
Reseat the tubes in their sockets and reinstall the top cover.
NOTE: When using the Torx wrench, make sure it is fully inserted so that the screw head is
not stripped.
Physical Placement
It is recommended that you provide for at least 6" of free space around the unit for proper
ventilation.
Mount the unit on a hard surface with proper ventilation underneath.
Do not stack the VK-P10SE phono stage on top of other units, nor vice versa.
General Description of VK-P10SE Phono Preamplifier
The VK-P10SE balanced all-tube phono stage is designed to provide the maximum possible
performance while operating in conjunction with the wide verity of phono cartridges available
today. The unit offers unmatched versatility in system configuration by providing the
following features:
- Wide range of user-selectable gains from 44dB to 79dB (See Specifications section
for choices)
- Built-in high-quality step-up transformers that can be used with very low output
phono cartridges.
- Selectable cartridge loading for both resistance and capacitance
- Absolute polarity reversal switch
Please refer to the Configuration Switches section of this manual for information on how to
configure the VK-P10SE phono stage for optimal performance in your system.