Balboa bwa BP2000 Quick Install Manual

Page of 2

Download

Bookmark us

Quick Install Guide For bwa™ Kit - BP2000/2100

– Use a phillips screwdriver to remove

the 2 top screws that hold the system

cover in place.

TOOL YOU WILL NEED

– Phillips screwdriver

STEP 1

STEP 2

– Insert the Balboa Wi-Fi Cable into either Panel Jack

J34 or J35.

ZOOM IN

STEP 3

– Remove 2 screws to open the cable holder.

WARNING!

Please contact an electrician or your local electrical company to

connect the Wi-Fi connector for you. DO NOT OPEN THE SPA

SYSTEM AND ATTEMP TO CONNECT THE WI-FI CONNECTOR

YOURSELF. The high electrical voltage will harm or kill you.

Page 1
Quick install guide for bwa™ kit - bp2000/2100 – use a phillips screwdriver to remove the 2 top screws that hold the system cover in place. Tool you will need – phillips screwdriver step 1 step 2 1 2 – insert the balboa wi-fi cable into either panel jack j34 or j35. Zoom in step 3 – remove 2 screws ...
Page 2: Step 4
Step 4 step 5 – place the wi-fi cable and control panel cable inside the wire holder. – insert the plastic holder and 2 screws back in place. Make sure the 2 cable wires are secure in place. – close up shot of how the 2 wires should look. – close the control panel system cover and secure the 2 top s...