1. DL manuals
  2. Balboa Instruments
  3. Remote Control
  4. Dolphin
  5. User Manual

Balboa Instruments Dolphin User Manual

Manual is about: Water-Proof Remote Control

Summary of Dolphin

  • Page 1

    Dolphin tm water-proof remote control instruments balboa incorporated p/n 47001_a.

  • Page 2: Table of Contents

    2 3 table of contents introduction . . . . . . . . . . . . . . . . . . . . . . . .3 features and functions . . . . . . . . . . . . . . . .4 key charts . . . . . . . . . . . . . . . . . . . . . . . . . .5 installing batteries . . . . . . . . . . . . . . . . . . . .7 programming tv control . . . . . ....

  • Page 3: Features and Functions

    4 5 features and functions use the illustration below to locate the dolphin features and study the key locations (on the next two pages) to learn how they function. The led (red light) blinks to show that the remote control is working and is sending signals. Press power once to turn on or off the se...

  • Page 4: Features and Functions

    7 use guide to display the program guide. Use exit to exit out of your cable converter’s menu and guide. Use the four directional keys to move the cursor in the program guide and menu screens. Use select/ok to choose options,ppv events, and to tune programs from the program guide. Use info to displa...

  • Page 5: Programming Tv Control

    8 9 programming tv control note: if you own a tv/vcr combination, skip thi section and perform “programming tv/vcr combo control” on page 16. Locate the brand name of your tv in the setup codes for tvs section below, and write it in the following space. Tv brand: the brands are listed in alphabetica...

  • Page 6

    11 10 kec 0180 ktv 0180, 0030, 0039, 0185, 0280 kaypani 0052 kenwood 0030, 0019 kloss 0024, 0046 lg 0056 lxi 0047, 0054, 0154, 0156, 0178 logik 0016 luxman 0056 mei 0185 mga 0150, 0030, 0178, 0019 mtc 0060, 0030, 0019, 0056, 0185 magnavox 0054,0030, 0179, 0020, 0024, 0096, 0186, 0187, 0386 majestic ...

  • Page 7: Programming

    13 12 programming vcr control note: if you own a tv/vcr combination, skip this section and perform “programming tv/vcr combo control” on page 16. Locate the brand name of your vcr in the setup codes for vcrs section below, and write it in the following space. Vcr brand: the brands are listed in alph...

  • Page 8

    15 14 magnavox 0035, 0039, 0081, 0000, 0149 magnin 0240 marantz 0035, 0081 marta 0037 matsushita 0035, 0162 memorex 0035,0037, 0048, 0039, 0047, 0240, 0000, 0104, 0162, 0046, 0307 minolta 0042, 0105 mitsubishi 0048, 0067, 0043, 0061 motorola 0035, 0048 multitech 0000, 0072 nec 0104, 0067, 0041, 0038...

  • Page 9: Programming

    17 16 programming tv/vcr combo control locate the brand name of your tv/vcr combo in the setup codes for tv/vcr combos section below, and write it in the following space. Tv/vcr combol brand: the brands are listed in alphabetical order with popular codes listed first.You will use one of these codes ...

  • Page 10: Programming Cable

    19 18 programming cable converter (or satellite receiver) control before you program the control to operate a cable or satellite converter, you’ll need to perform the following instructions to unlock the cable key, enter in a new code, and lock the cable key again. To unlock the cable key: 1. Turn o...

  • Page 11: Setup Codes For

    21 20 setup codes for dbs receivers: alphastar 0772 echostar 0775 expressvu 0775 general instrument 0627, 0361, 0869 hts 0775 hitachi 0819 hughes 0749 jvc 0775 jerrold 0627, 0361 magnavox 0724, 0722 memorex 0724 next level 0869 panasonic 0701 philips 0724, 0722 primestar 0627, 0361 rca 0566 sony 063...

  • Page 12: Programming

    23 22 programming audio control using the dolphin’s rcvr mode, you can also control an audio component, such as cd or dvd player, a stereo receiver, a stereo amplifier, or a dbs audio service. Locate the brand name of your audio component in the one of accompanying code lists (starting on the next p...

  • Page 13: Setup Codes For Dvd Players:

    25 24 setup codes for dvd players: jvc 0558 kenwood 0534 magnavox 0503 mitsubishi 0521 onkyo 0503 panasonic 0490 philips 0503, 0539 pioneer 0525, 0571 proscan 0522 rca 0522 samsung 0573 sony 0533 technics 0490 toshiba 0503 yamaha 0490 zenith 0503 setup codes for stereo receivers: adc 0531 aiwa 0158,...

  • Page 14: Searching For Your Code

    27 26 searching for your code if your tv, vcr, cable converter or audio component does not respond to the dolphin after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, to search for a code for your tv: 1. Turn on your tv...

  • Page 15: Re-Assigning Device Keys

    28 re-assigning device keys the dolphin can be set up to control a second tv or vcr, or any combination of four home entertainment components. For example, to have the dolphin control a tv, a cable converter, and two vcrs, you will need to re-assign the unused audio key to operate the second vcr as ...

  • Page 16: Using The

    31 30 using the learning feature you can program the buttons to add functions that are unique to your home entertainment devices (e.G.,vcr tracking up or down). Note: please have your original remote controls handy before programming learning. Be sure to press each key within 10 seconds of the previ...

  • Page 17: Using The

    32 using the ir/rf command center the dolphin remote control (urc-9811) can be used with an optional ir/rf command center which receives radio-frequency (rf) signals from the dolphin, anywhere in your home, up to 100 feet away*. Once it is set up, the ir/rf command center will convert the rf signals...

  • Page 18: Specifications

    35 34 specifications remote control power 2 aaa batteries ir/rf console power 120 vac remote control to ir/rf console range up to 100 feet (30.48 m)* ir/rf command console to device range 25 feet (7.62 m) ± 30° remote control dimensions (h x w x d) 9-2⁄16 x 2-10⁄16 x 1-3⁄16 in. 232 x 65 x 31 mm ir/r...

  • Page 19: Troubleshooting

    36 troubleshooting problem: led does not blink when you press a key. Solution: replace the batteries with two (2) new aa alkaline batteries (see page 7). Problem: led blinks when you press a key, but home entertainment component does not respond. Solution: make sure you are aiming the dolphin at you...