Balboa Water Group GEMINI PLUS II Owner's And Operator's Manual

Summary of GEMINI PLUS II

  • Page 1

    Gemini plus ii ® whirlpool bath pumps owner’s and operator’s manual models are ul recognized 1795 and / or csa (cul) certified where applicable. Check pump nameplate or consult factory for specific approvals. Please fill in information from pump nameplate pump model __________________________ spec n...

  • Page 2: General Information

    Important safety instructions warning - when installing and using this electrical equipment, basic safety precautions should be followed, including the following: read and follow all instructions in this manual. 1. Read and follow instructions as set forth in the owners manual from the 2. Manufactur...

  • Page 3: Wiring Instructions

    Hand tighten the union nut only! Excessive torque is unnecessary and may cause damage to the union and pump. Do not use a pipe wrench or over torque the nut! There is a gasket supplied with the sleeve connector. If the connector is tightened properly there is no need for any sealant or lubricant to ...

  • Page 4: Trouble Shooting Guide

    Basic operation and maintenance (cont.) other points to keep in mind: the pump/motor assembly does not require maintenance. However, the tub and pump should be checked • semi-annually for leakage of any kind. • the electric motor uses sealed grease bearings, which do not require additional lubricati...