1. DL manuals
  2. Baldwin Boxall
  3. Amplifier
  4. ATTMR
  5. Operating Instructions

Baldwin Boxall ATTMR Operating Instructions

Summary of ATTMR

  • Page 1

    Baldwin boxall communications ltd. Wealden industrial estate, farningham road crowborough, east sussex, tn6 2jr telephone: 01892 664422 fax: 01892 663146 website: www.Baldwinboxall.Co.Uk email: mail@baldwinboxall.Co.Uk iattmr issue 1 22/09/1999 attmr operating instructions.

  • Page 2

    - 2 - issue 1 general description the attmr is a continuous play twin cassette music system. Any number of attmr units may be slaved together to form a multi-cassette system. The basic unit will play tapes in the following sequence:- both sides of tape 1 followed by both sides of tape 2. For a singl...

  • Page 3

    - 3 - issue 1 rear panel connections 1 input: external inputs are connected via phono plugs. 2 output: external amplifiers can be fed from this socket via phono plugs. 3 manual / automatic start switch. This facility allows the unit to start automatically when tapes are inserted or waits for the mas...

  • Page 4

    - 4 - issue 1 attmr – configuration / connections. Stand alone mode. When a single attmr is used as a twin deck music system, the remote terminals must be wired as follows: internally, link lk3 must be set to its master position. Slave connections several attmr units may be connected together to for...

  • Page 5

    - 5 - issue 1 output / input connections the outputs of the last slave unit must be connected to the inputs of the preceding unit, and so on until upto the master unit. The outputs of the master unit are then connected to an amplifier. An example of the output / input connections for a master and tw...