Baldwin Boxall Vigil 3 Installation Instructions Manual - page 15
of
20
Vigil 3 Amplifiers
Installation Instructions
Vigil 3 Amplifier Installation Manual issue 1
9
3 Basic Fault Finding
The Vigil 3 Amplifiers front panels provide indicators to show the
current status of the unit. The following sections provide basic
Fault Finding information should these indicators show a fault
condition.
3.1 “OK / F
AULT
” LED
FLASHING
OR
NOT
ILLUMINATED
The OK/FAULT LED should be permanently illuminated green
to show the mains and 24V DC supplies are present.