- DL manuals
- Balluff
- Network Hardware
- BNI PNT-502-105-Z015
- User manual
Balluff BNI PNT-502-105-Z015 User manual
Summary of BNI PNT-502-105-Z015
Page 1
Bni pnt-502-105-z015 ip67 modules 4 io-link/in-/outputs,12 in-/outputs user’s guide.
Page 2
Www.Balluff.Com 1 content 1 notes 3 1.1. About this guide 3 1.2. Structure of the guide 3 1.3. Typographical conventions 3 enumerations 3 actions 3 syntax 3 cross-references 3 1.4. Symbols 3 1.5. Abbreviations 3 2 safety 4 2.1. Intended use 4 2.2. General safety notes 4 2.3. Meaning of the warnings ...
Page 3
Www.Balluff.Com 2 content 7 appendix 16 7.1. Included material 16 7.2. Ordercode 16 7.3. Order information 16.
Page 4
Balluff network interface profinet, bni pnt-502-105-z015 www.Balluff.Com 3 1 notes 1.1. About this guide the bni pnt- … serves as a decentralized io-link, input and output module for connecting to an profinet ™ network. 1.2. Structure of the guide the guide is organized so that the chapters build on...
Page 5
Www.Balluff.Com 4 2 safety 2.1. Intended use this guide describes the bni pnt- … serves as a decentralized io-link, input and output module for connecting to an profinet ™ network. 2.2. General safety notes installation and startup are to be performed only by trained specialists. Any damage resultin...
Page 6
Balluff network interface profinet, bni pnt-502-105-z015 www.Balluff.Com 5 3 getting started 3.1. Modul overview figure 1 – overview bni pnt-502-105-z015 1 mounting hole 2 profinet ™ port 2 3 display 4 power supply in 5 status led 6 port 1 (standard i/o) 7 pin/port led: signal status 8 port 3 (stand...
Page 7
Www.Balluff.Com 6 3 getting started 3.2. Mechanical connection the module is attached using 2 m6 screws and 2 washers. Isolation pad as accessory available 3.3. Electrical connection power supply power supply “in” (7/8”, male) pin function description 1 gnd actuator power supply 0 v 2 gnd bus- / sen...
Page 8
Balluff network interface profinet, bni pnt-502-105-z015 www.Balluff.Com 7 3 getting started i/o-port m12, a-coded, female pin function 1 +24v, 200ma 2 input / output 3 gnd 4 input / output 5 fe note! For the digital sensor inputs follow the input guideline per en61131-2, type 2. Note! Each output s...
Page 9
Www.Balluff.Com 8 4 technical data 4.1. Dimensions 4.2. Mechanical data housing material die case zinc, matt nickel plated enclosure rating per iec 60529 ip 67 (only when plugged-in and threaded-in) supply voltage 7/8” 5-pin male input ports / output ports m12, a-coded (8 x female) dimensions (w x h...
Page 10
Balluff network interface profinet, bni pnt-502-105-z015 www.Balluff.Com 9 4 technical data 4.5. Profinet profinet port 1 x 10base-/100base-tx connection for profinet port m12, d-coded cable types per ieee 802.3 shielded twisted pair min. Stp cat 5/ stp cat 5e data transmission rate 10/100 mbit/s ma...
Page 11
Www.Balluff.Com 10 5 integration 5.1. Configuration when project planning profibus devices, a device is mapped as a modular system which consists of a header module and multiple data modules. Gsdml-file the device data required for project planning are stored in gsdml files (generic station descript...
Page 12
Balluff network interface profinet, bni pnt-502-105-z015 www.Balluff.Com 11 5 integration including the module to configuration object properties.
Page 13
Www.Balluff.Com 12 5 integration naming of the device configuration of the ethernet address.
Page 14
Balluff network interface profinet, bni pnt-502-105-z015 www.Balluff.Com 13 5 integration finish hardware configuration integration to the profinet network.
Page 15
Www.Balluff.Com 14 5 integration scanning the system succesfully integrated in the system selection of the device names mac id of the device mac id of the device assigned device name.
Page 16
Balluff network interface profinet, bni pnt-502-105-z015 www.Balluff.Com 15 6 webserver 6.1. General the bni pnt-502 module includes an internal webserver to get detailed information about the current state. Also you can use it to configurate the module and the connected io-link devices. First make ...
Page 17
Www.Balluff.Com 16 7 appendix 7.1. Included material the bni pnt consists of the following components: • io-link block • 4 blind plugs m12 • ground strap • screw m4x6 • 20 labels 7.2. Ordercode bni pnt-502-105-z015 balluff network interface profinet functions 502 = ip 67 io-link master-modul variant...
Page 18
Balluff network interface profinet, bni pnt-502-105-z015 www.Balluff.Com 17 notes.
Page 19
Www.Balluff.Com 18 notes.
Page 20: Www.Balluff.Com
Balluff network interface profinet, bni pnt-502-105-z015 www.Balluff.Com 19 www.Balluff.Com balluff gmbh schurwaldstrasse 9 73765 neuhausen a.D.F. Germany tel. +49 7158 173-0 fax +49 7158 5010 balluff@balluff.De nr. 8 8 3 2 2 0 e ed iti o n 1 1 0 9 rev is e d ed iti o n 1 1 0 3 su b je c t to m o d ...