1. DL manuals
  2. Balt
  3. Indoor Furnishing
  4. 27508
  5. Assembly Instructions Manual

Balt 27508 Assembly Instructions Manual

Summary of 27508

  • Page 1

    1 assembly instructions 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567...

  • Page 2: #27508   Floor Lectern

    2 p-1 left side panel 1 ea p-2 right side panel 1 ea p-3 bottom shelf 1 ea p-4 back panel 1 ea p-5 slanted top panel 1 ea p-6 shelf support 1 ea p-7l left metal bracket 1 ea p-7r right metal bracket 1 ea p-8 laptop shelf 1 ea p-9 middle shelf 1 ea p-10 side shelf 1 ea p-11 book stop 1 ea p-12 left k...

  • Page 3

    3 3. 6. E place the right side panel (p-2) with the predrilled holes facing up and install 7 each cam posts (d) in the 7 threaded insert nuts(pre-installed) as shown in illustration # 1. Install 8 each wood dowels (e) into the holes as shown in illustration # 1. P-2 d p-1 e place the left side panel...

  • Page 4

    4 illustration # 4 p-1 be sure that arrow on top of camlock (c) aligns with centerline of edge drilled hole. Phillips screwdriver centerline of edge drilled hole. Arrow 8. 10. P-4 c illustration # 3 place the back panel (p-4) with the pre-drilled holes facing up and install 6 each cam locks (c) in t...

  • Page 5: 1-800-749-2258

    5 15. P-6 p-1 be sure that arrow on top of camlock (c) aligns with centerline of edge drilled hole. Phillips screwdriver centerline of edge drilled hole. Arrow illustration # 8 16. 17. Illustration # 7 place the slanted top panel (p-5) with the pre-drilled holes facing up and install 4 each cam lock...

  • Page 6

    6 illustration # 9 p-4 c p-9 p-1 23. 24. Slide slanted top panel (p-5), middle shelf (p-9) and back panel (p-4) over the wood dowels (e) and the camposts (d) in the left side panel (p-1) as shown in illustration #9. Secure by turning the cam locks (c) 1/4 turn until they lock. P-5 p-6 c e d c e illu...

  • Page 7

    7 slide side shelf (p-10) through the slot in right side panel (p-2) and into the metal brackets (p-7l & p-7r) as shown in illustration #11. Insert 2 thumbscrews (a3) through the slot in metal brackets (p-7) and into side shelf (p-10). Finger tighten only. Slide bottom shelf (p-3) in the groove in t...