1. DL manuals
  2. Balt
  3. Outdoor Cart
  4. 27531
  5. Assembly Instructions Manual

Balt 27531 Assembly Instructions Manual

Manual is about: Wide body LCD TV Cart with 2 Pull-out Shelves & Locking Cabinet. Support up to A 54 inch flat panel TV.

Summary of 27531

  • Page 1

    1 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 1234567890123456789012345678901212345678901234567890123456789...

  • Page 2: #27531

    2 p13 laptop shelf 19x18 1 ea p14 left support tubes 1 ea p15 right support tubes 1 ea p16 top lcd bracket 1 ea p17 bottom lcd bracket 1 ea p18 cord winder 1 ea p19 electrical outlet 1 ea p1 formed leg ”o” 2 ea p2 formed leg ”x” 2 ea p3 top shelf 2 ea p4 middle shelf 1 ea p5 bottom shelf 1 ea p6 sid...

  • Page 3: #27531

    3 hardware list a1 sq hd screw m8x15mm 24 ea a2 screw m5x70mm pan hd 2 ea a3 screw m6x35mm pan hd 4 ea a4 screw m8x20mm sockethd 2 ea a5 screw m8x25mm dog point 2 ea a6 screw m8x25mm cone point 2 ea a7 screw pan hd m5x10mm 24 ea a8 screw pan hd m6x15mm 4 ea electrical back of monitor tube-bottom kb ...

  • Page 4

    4 #27531 wide body lcd cart assembly diagram identify and separate all the parts and hardware. Illustration # 1 1.) 2.) r ead t hrough i nstructions from beginning to end before starting to assemble unit . Attach 2 legs (p-1) and 2 legs (p-2) to the top shelf (p-3) using 8 screws (a1), and 8 nuts (b...

  • Page 5

    5 press 2 locking casters (d) and 2 non-locking casters (e) into the factory installed nylon inserts in the base cabinet (p-1) as shown in illustration #3b. Note: be sure that door stop on bottom shelf (p5) is oriented toward the front of cart and grommet in middle shelf (p4) is toward the back as s...

  • Page 6

    6 attach cord winder (p-18) and electrical outlet (p-19) to top shelf (p-3) using 2 screws (a2) and 2 nuts (b2). Remove screws (a4) from bottom of left and right support tubes (p-14 & p-15) and attach to top shelf (p-3) as shown in illustration # 6. Illustration #5 a2 a2 p-15 a4 b2 8.) 9.) p-14 p-18...

  • Page 7

    7 attach top lcd bracket (p-16) to left and right support tubes (p-14 & p-15) at desired height using 2 screws (a5) as shown in illustration # 7. Attach bottom lcd bracket (p-17) to left and right support tubes (p-14 & p-15) at desired height using 2 screws (a6). Illustration #7 11.) 12.) p-16 p-17 ...

  • Page 8

    8 illustration #10 15.) attach left door (p-8) to the left front leg (p-1) using 3 screws (a7) and 3 washers (c1) as shown in illustration # 9. Illustration #9 14.) a8 b3 p-10 attach 4 angle brackets (p-10) to thelaptop shelf (p-13) using 4 screws (a8) and 4 hex nuts (b3) as shown in illustration # ...

  • Page 9

    9 illustration #11 p-13 p-10 a3 b3 16.) tighten all screws using phillip’s head screwdriver and wrench. (not provided) attach 4 angle brackets (p-10) to the 4 legs (p-1 & p-2) using 4 screws (a3) and 4 nuts (b3) as shown in illustration # 11. Place cabinet shelf (p-12) on top of shelf supports (p-11...