1. DL manuals
  2. Balt
  3. Indoor Furnishing
  4. 27666
  5. Assembly Instructions Manual

Balt 27666 Assembly Instructions Manual

Summary of 27666

  • Page 1

    1 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 1234567890123456789012345678901212345678901234567890123456789...

  • Page 2: #27666

    2 part drawing description qty part drawing description qty #27666 refreshment / utility cart hardware list a m6 x12mm 12 ea a1 m4 x 12mm 20 ea b1 2” caster 3 ea b2 2” locking caster 2 ea c campost 12 ea d wood dowel 12 ea e shelf supports 4 ea f cams 12 ea g wood screw 16 ea h door handle 2 ea i do...

  • Page 3: #27666

    3 part drawing description qty #27666 refreshment / utility cart p-9 p-10 door shelf 6 ea top panel 1 ea p-11 shelf 1 ea missing parts or ups damaged parts for your convenience you can email us at support@moorecoinc.Com 24hours 7 days a week do not use unless all screws are tight. At least every six...

  • Page 4

    4 #27666 refreshment / utility cart assembly diagram identify and separate all the parts and hardware. Illustration # 1 1.) r ead t hrough i nstructions from beginning to end before starting to assemble unit . 2.) attach three non-locking casters (b1) to the bottom of the base (p-1) in the locations...

  • Page 5

    5 illustration # 4 illustration # 3 4.) p-2 6.) d c d e d f c d f push in two wood dowels (d) into the top edge of the side panel (p-2) and two wood dowels (d) into the bottom edge of the side panel (p-2) as shown in illustration #3. 5.) screw in two camposts (c) into the threaded holes near the bac...

  • Page 6

    6 illustration # 5 p-3 d f illustration # 6 9.) 10.) place four cams (f) into the large predrilled holes in the back panel (p-3). Make sure the arrow on the cam is pointed to the joining hole from the closest edge. Se illustration #5 and the detail detail line up and insert the camposts (c) on each ...

  • Page 7

    7 illustration # 8 illustration # 7 11.) line up and insert the camposts (c) that are installed in the base assembly with the holes in the side panel assembly. Turn the cams (f) 90 degrees clockwise to lock the panel assemblies together as shown in illustration #7. F c c 12.) p-9 p-7a a p-7 a attach...

  • Page 8

    8 illustration # 9 13.) attach the right door panel (p-5) to the right door assembly from step 12 using six cs wood screws (g) as shown in illustration #9. P-5 g 14.) g illustration # 10 a p-9 p-8a a p-8 attach three door shelves (p-9) to the left door side (p-8a) using three screws (a) as shown in ...

  • Page 9

    9 illustration # 11 15.) g g p-4 attach the left door panel (p-4) to the left door assembly from step 14 using six cs wood screws (g) as shown in illustration #11. 16.) place a door hinge rod (p-6) in the flange holes ofm the right and left door assemblies as shown in illustration #12. P-6 p-6 illus...

  • Page 10

    10 p-1 p-6 17.) illustration # 13 place a door spacer (m) on the base over each large predrilled door hinge rod hole. Place the right and left door assemblies on the base (p-1) so that the door hinge rod (p-6) of each goes through the door spacer (m) and into the large predrilled hole in the base as...

  • Page 11

    11 19.) illustration # 14 place a door spacer (m) on top of each door hinge rod (p-6). Place the top panel (p-10) down on the cart assembly. Line the camposts(c) in the bottom of the top with the holes in the side panels (p-2). Make sur the large predrilled holes in the bottom of the top panel line ...

  • Page 12

    12 21.) illustration # 16 install the door lock (j) to the right door panel (p-5) as shown in illustration # 16 j j p-5 place the shelf (p-11) inside the cart on the shelf supports (e). Attach the lock plate (k) to the left door panel (p-4) using two screws lock plate screws (l) in the location show...

  • Page 13: #27666

    13 #27666 refreshment / utility cart 20 3/4” 29 1/2” 35 1/2” 2” twin wheel casters 11 3/4” 7 1/4”.