1. DL manuals
  2. Balter
  3. Security Camera
  4. BTZ-2700
  5. Instruction Manual

Balter BTZ-2700 Instruction Manual

Manual is about: High Speed Dome Camera

Summary of BTZ-2700

  • Page 1

    Instruction manual high speed dome camera btz-2700/3700

  • Page 2

    Speed dome camera instruction manual 2/53 caution risk of electric shock do not open caution : to reduce the risk of electrical shock, do not open the covers. No user serviceable parts inside. Refer servicing to qualified service personal this lightning flash with arrowhead symbol is intended to ale...

  • Page 3

    Speed dome camera instruction manual 3/53 important safety guide 1. Read, heed and follow all the instructions read all the safety and operating instructions before using the product. 2. Keep this manual keep this manual for reference in future. 3. Attachments / accessories use only the attachments ...

  • Page 4

    Speed dome camera instruction manual 4/53 caution operating z before using, make sure that the power supply and others are properly installed. Z while operating, if any abnormal condition or malfunction is observed, stop using the product immediately and then contact your local dealer. Handling z do...

  • Page 5

    Speed dome camera instruction manual 5/53 ① introduction model code 6 features 8 package components 10 main part description 11 ② installation dip switch setup 12 installation with ceiling mount bracket 15 installation with wall mount bracket 16 wiring and cabling 17 ③ operation check point before o...

  • Page 6

    Speed dome camera instruction manual 6/53 introduction 1.

  • Page 7

    Speed dome camera instruction manual 7/53 features powerful zoom camera & setup options image sensor : 1/4" double density interline transfer ccd (btz-3700) 1/4" super had color ccd (btz-2700) zoom : ×27 optical zoom, ×12 digital zoom (btz-2700) ×37 optical zoom, ×12 digital zoom (btz-3700) day & ni...

  • Page 8

    Speed dome camera instruction manual 8/53 z max. 8 sets of swing are programmable. This function is that the camera moves repetitively between two preset positions at programmed speeds. Z max. 4 patterns are programmable. This function is that the camera memorizes the path (mostly curve path) by the...

  • Page 9

    Speed dome camera instruction manual 9/53 network function(only for the ip addressable models) z network functions including remote monitoring, bidirectional audio and others are available through ip based network such as lan, adsl/vdsl, and wireless lan. For more information, refer to the separated...

  • Page 10

    Speed dome camera instruction manual 10/53 package component product & accessories z main body & surface mount bracket z default accessories [main cable, wrench] z accessories for the models with alarm in/out function [i/o cable] z accessories for the ip addressable models [crossover lan cable, audi...

  • Page 11

    Speed dome camera instruction manual 11/53 main part description dip switch dome cover sensor i/o port (i/o model) main connector audio port (ip model) lan port (ip model) reset switch (ip model) mounting hook mounting screw hole z dome cover do not detach the protection vinyl from the dome cover be...

  • Page 12

    Speed dome camera instruction manual 12/53 dip switch setup before installing the camera, set up the dip switch to configure the camera id and the communication protocol. Camera id setup on on 1 2 3 4 5 6 7 8 z id numbers of cameras are set up with binary numbers. See the examples shown below. Pin 1...

  • Page 13

    Speed dome camera instruction manual 13/53 communication protocol setup 1 2 3 4 on on z select an appropriate protocol with the dip switch combination. Switch mode p0 (pin 1) p1 (pin 2) p2 (pin 3) protocol off off off pelco-d, 2400 bps on off off pelco-d, 9600 bps off on off pelco-p, 4800 bps on on ...

  • Page 14

    Speed dome camera instruction manual 14/53 terminal resistor setup 1 2 3 4 on on the terminal resistor is used for the following cases. Z case 1 : in case that the control cable length between a camera and a controller is relatively very long (1:1 connection) if the communication cable length is ver...

  • Page 15

    Speed dome camera instruction manual 15/53 installation with ceiling mount bracket ① remove the ceiling tile from the ceiling and cut a hole whose diameter is 30~40mm on the ceiling tile to pass the wire(s) and cable(s) through to the upside of the ceiling. (in case of the wiring and cabling through...

  • Page 16

    Speed dome camera instruction manual 16/53 installation with wall mount bracket ① make a hole whose diameter is 30~40mm on the mounting surface to pass the wire(s) and cable(s) through the mounting surface. (in case of the wiring and cabling through the mounting surface only) then prepare the wall m...

  • Page 17

    Speed dome camera instruction manual 17/53 wiring and cabling rs-485 bnc sensor i/o lan cable audio cable main cable i/o cable browser power monitor controller / dvr mic speaker ir sensor door switch internet port description z main cable port pin number (rj45) connector / wire color signal 1 video ...

  • Page 18

    Speed dome camera instruction manual 18/53 power description carefully check the voltage and current capacity of the rated power. The rated power is indicated in the back of main unit. Model input voltage range current consumption btz-1000 a 8 . 0 analog model dc12v model dc 11v ~ 18v ac24v model an...

  • Page 19

    Speed dome camera instruction manual 19/53 video z use bnc coaxial cable only. Alarm input before connecting sensors, check driving voltages and output signal types of the sensors. Since output signal types of the sensors are divided into open collector type and voltage output type in general, the w...

  • Page 20

    Speed dome camera instruction manual 20/53 check points before operation z before turning on the system, check if the wire(s) and cable(s) are connected properly. Z check if the camera id on the controller is properly selected. The camera id must be identical to that of the target camera. The camera...

  • Page 21

    Speed dome camera instruction manual 21/53 osd menu z function with osd menu, the system can be properly configured for each application. Z entering into osd go preset [95] reserved presets (hot keys) z description some preset numbers are reserved to change some parameters without entering into osd ...

  • Page 22

    Speed dome camera instruction manual 22/53 preset z function max. 127 positions are programmable. The preset number can be assigned from 1 to 128 except 95. Preset 95 is reserved for entering into osd menu. Camera parameters such as white balance, auto exposure and others can be set up independently...

  • Page 23

    Speed dome camera instruction manual 23/53 pattern z function this function is that the camera memorizes the path (mostly curve path) by the joystick of the controller and revives the trajectory operated by joystick as closely as possible. Max. 4 patterns are programmable and maximum 1200 communicat...

  • Page 24

    Speed dome camera instruction manual 24/53 group z function this function is that the camera memorizes the combination of presets, pattern and/or swings sequently and runs presets, pattern and/or swings repetitively. Max. 8 sets of group are programmable. Each group can have max. 20 actions which ar...

  • Page 25

    Speed dome camera instruction manual 25/53 z alarm input 3 alarm inputs are available. When external sensors activate, the camera runs pre-defined actions such as preset, pattern, swing and group. After the pre-defined time period passed, “post alarm” activates, which is pre-defined. Note that only ...

  • Page 26

    Speed dome camera instruction manual 26/53 osd display p/t/z information camera id alarm information action title preset label label12345 preset1 i:-2- o:1 cam 1 15/4/x1/n z p/t/z information displays the amount of pan from zero degree vertical, the amount of tilt from zero degree horizontal and cur...

  • Page 27

    Speed dome camera instruction manual 27/53 quick programming guide z the menu items with always have sub-menus. Z to go to submenus or make the cursor move to the right, press near key. Z to go to the previous-upper level menus, press far key. Z to make a selection, press near key z to cancel a sele...

  • Page 28

    Speed dome camera instruction manual 28/53 display setup display setup ------------------------ camera id on ptz information auto action title auto preset label auto alarm i/o auto back exit display setup allows you to program how labels are displayed on the monitor. In case of auto, the labels are ...

  • Page 29

    Speed dome camera instruction manual 29/53 compass direction setup set north direction ------------------------ move to target position [near:save /far:cancel privacy zone mask setup privacy zone ------------------------ mask no 1 undefined display off clear mask cancel back exit move the camera to ...

  • Page 30

    Speed dome camera instruction manual 30/53 privacy zone mask area setup edit mask 1 ------------------------ move to target position [near:select/far:cancel] privacy zone mask size setup edit mask 1 ------------------------ [ :adjust mask width] [ :adjust mask height] [near:save /far:cancel] move yo...

  • Page 31

    Speed dome camera instruction manual 31/53 camera setup zoom camera setup ------------------------ focus mode semiauto digital zoom on image flip off sharpness 16 stabilization off back exit sets the general functions of zoom camera module. Z focus mode [auto/manual/semiauto] sets camera focus mode....

  • Page 32

    Speed dome camera instruction manual 32/53 white balance setup wb setup - global ------------------------ wb mode auto red adjust --- blue adjust --- back exit z wb mode [auto/manual] retains color balance over a color temperature range. In auto mode, this feature automatically processes the viewed ...

  • Page 33

    Speed dome camera instruction manual 33/53 auto exposure setup ae setup - global ------------------------ backlight off day/night auto brightness 50 iris auto shutter esc agc middle ssnr middle sens-up back exit z backlight [off/wdr/blc/hlc] or [off/blc/hlc] sets backlight compensation. If a bright ...

  • Page 34

    Speed dome camera instruction manual 34/53 z shutter speed [esc/a.Flicker/manual(×256~1/120000 sec)] sets shutter speed. Shutter speed is the duration of the electronic shutter. If iris is set to manual and shutter speed is set to esc, shutter speed has higher priority. If shutter speed is set to a....

  • Page 35

    Speed dome camera instruction manual 35/53 wdr (wide dynamic range) setup wdr ------------------------ limit middle level 50 back exit hlc (high light compensation) setup hlc ------------------------ limit low color 5 back exit z limit [low/middle/high] z level [0~100] osd menu 4 z limit [auto/manua...

  • Page 36

    Speed dome camera instruction manual 36/53 motion setup motion setup ------------------------ motion lock off pwr up action on auto flip on jog max speed 120/sec jog direction inverse frz in preset off back exit sets the general functions of pan/tilt motions. Z motion lock [on/off] if motion lock is...

  • Page 37

    Speed dome camera instruction manual 37/53 parking action setup parking action setup ------------------------ park enable off wait time 00:10:00 park action home back exit this feature allows the camera to begin a specified action after a programmed time of inactivity. Z park enable [on/off] if park...

  • Page 38

    Speed dome camera instruction manual 38/53 alarm input setup alarm input setup ------------------------ alarm no. 1 type n.Open action not used hold time endless post action home back exit defines alarm function. When an alarm is receive, an input signal to the camera triggers the user-defined actio...

  • Page 39

    Speed dome camera instruction manual 39/53 preset setup preset setup ------------------------ preset no. 1 clr preset cancel label123 relay out off cam adjust global back exit z preset number [1~128] selects a preset number to set up. If a selected preset is already defined, the camera moves to the ...

  • Page 40

    Speed dome camera instruction manual 40/53 preset scene setup edit scene - preset 1 ------------------------ move to target position [near:save /far:cancel] preset label setup edit label - preset 1 ------------------------ [ ] ---------- 1234567890 ok abcdefghij cancel klmnopqrst uvwxyzabcd efghijkl...

  • Page 41

    Speed dome camera instruction manual 41/53 swing setup swing setup ------------------------ swing no. 1 1st pos. Not used 2nd pos. Not used swing speed 30/sec clear swing cancel run swing back exit z swing number [1~8] selects a swing number to edit. If the selected swing is not defined, "not used" ...

  • Page 42

    Speed dome camera instruction manual 42/53 pattern setup pattern setup ------------------------ pattern no. 1 undefined clr pattern cancel run pattern back exit pattern edit edit pattern 1 ------------------------ move to start position [near:start /far:cancel] edit pattern 1 [near:save /far:delete]...

  • Page 43

    Speed dome camera instruction manual 43/53 group setup group setup ------------------------ group no. 1 undefined clear group cancel run group back exit group edit edit group 1 ------------------------ no action ### dwell opt ------------------------ 1 none 2 none 3 none 4 none 5 none --------------...

  • Page 44

    Speed dome camera instruction manual 44/53 edit group 1 ------------------------ no action ### dwell opt ------------------------ 1 none 2 none 3 none 4 none 5 none ------------------------ save [ :move cursor] cancel [ :change val.] edit group 1 ------------------------ no action ### dwell opt ----...

  • Page 45

    Speed dome camera instruction manual 45/53 edit group 1 ------------------------ no action ### dwell opt ------------------------ 1 preset 1 00:03 360 2 none 3 none 4 none 5 none ------------------------ save cancel ⑥ after finishing setting up, press far key to exit. Then the cursor will move to “s...

  • Page 46

    Speed dome camera instruction manual 46/53 system initialization system initialize ------------------------ clear all data no clr display set no clr camera set no clr motion set no clr edit data no reboot camera no reboot system no back exit factory default z display parameters z camera parameters c...

  • Page 47

    Speed dome camera instruction manual 47/53 specifications camera part (btz-3700 model) l a p c s t n t a m r o f l a n g i s o e d i v d c c r e f s n a r t e n il r e t n i y t i s n e d e l b u o d ' ' 4 / 1 r o s n e s e g a m i total pixels 811(h)×508(v) 410k 795(h)×596(v) 470k effective pixels ...

  • Page 48

    Speed dome camera instruction manual 48/53 camera part (btz-3300 model) l a p c s t n t a m r o f l a n g i s o e d i v d c c r e f s n a r t e n il r e t n i y t i s n e d e l b u o d ' ' 4 / 1 r o s n e s e g a m i total pixels 811(h)×508(v) 410k 795(h)×596(v) 470k effective pixels 768(h)×494(v) 3...

  • Page 49

    Speed dome camera instruction manual 49/53 camera part (btz-3300tw model) l a p c s t n t a m r o f l a n g i s o e d i v d c c r o l o c d a h r e p u s ' ' 4 / 1 r o s n e s e g a m i total pixels 811(h)×508(v) 410k 795(h)×596(v) 470k effective pixels 768(h)×494(v) 380k 752(h)×582(v) 440k horizont...

  • Page 50

    Speed dome camera instruction manual 50/53 camera part (btz-2700 model) l a p c s t n t a m r o f l a n g i s o e d i v d c c r o l o c d a h r e p u s ' ' 4 / 1 r o s n e s e g a m i total pixels 811(h)×508(v) 410k 795(h)×596(v) 470k effective pixels 768(h)×494(v) 380k 752(h)×582(v) 440k horizontal...

  • Page 51

    Speed dome camera instruction manual 51/53 mechanism part 0 6 3 n a p °(endless) movement range 0 9 t li t ° 0 6 3 t e s e r p °/sec. Jog 0.05 ~ 360°/sec. (proportional to zoom) speed 0 8 1 ~ 1 g n i w s °/sec. Preset 127 presets (label, independent camera parameter setting) ] n r e t t a p / ) e t ...

  • Page 52

    Balter security gmbh - in den diken 33 - 40472 düsseldorf / germany 52/53 mechanical t n u o m l l a w t n u o m g n il i e c e t a n o b r a c y l o p e m o d s b a , e t a n o b r a c y l o p l a n r e t n i material m u i n i m u l a l a n r e t x e dome size ∅150mm / ∅ 5.9” dimension ∅192×265.3 ...

  • Page 53

    Balter security gmbh - in den diken 33 - 40472 düsseldorf / germany 53/53 dimension main body ceiling mount type 192 83 30 19 0. 3 150 75 19 0. 3 158.2 56.4 56.4 65 32 .3 74 .1 81 .5 1.5" npt wall mount type 296 27 6. 6 118.6 80 10 0 13 8. 6 4- 8 [unit : mm] specifications 5.