Bamo GsM 24e Instruction Manual - page 4
06-03-2013
248 M1 01 D
Page 4
The configuration of the Modem could be done automatically or manually:
1st method: Automatic configuration through the software GSMSet with a PC
or
2nd method: Manual configuration: only for advanced users.
4. Automatic configuration using the software GSMSet
Do not switch on the power before ending the following routine:
l
Install the software GSMSet
l
Connect the serial cable to the PC
l
Connect the serial cable to the MODEM
l
Run the software GSMSet
l
On the screen, choose the language,
l
The corresponding COM port and
l
Click on "CONNECTION" (Connexion)
Switch on the Modem by pressing the red push button on the main control unit
Follow the steps, through the PC:
1/ Run the AUTO CONFIGURATION (only for the first connection)
2/ Enter the phone number (or more than one) of operators
3/ Erase wrong numbers if any
4/ Enter an identification name of the system BAMOBOX (code/ TAG/ Place etc.)
5/ Enter the text that will be sent in case of an alarm, for each channel
l
Click on “DECONNEXION” (Disconnect)
!
!
1)
2)
3)
4)
5)