K530s lte m2m & vehicle mount router installation guide.
Package contents standard accessories bandluxe lte m2m & vehicle mount router mounting screws power adapter power adapter cable optional accessories water-proof magnetic base lte antenna stick-type wifi antenna water-proof active gps antenna cigarette lighter power converter 1 protection caps.
Hardware installation 1. Mount the router with the four screws if needed. (figure1) 2. K530s has sprint embedded sim inside. For special application that you have to use an external sim card, please follow below instruction to load the sim card: (figure 2) (a) place the sim card tray upside down. Se...
Logging into the k530s 1. One of the following two methods can be chosen to link your router with a pc: a) wireless connection a) for windows user -go to control panel > network connections. Right click on wireless network connection and choose view available wireless networks. Select default ssid [...
1. When the device is in reboot, 4 leds (gps, wifi, lan1, lan2) will light up together. 2. When the device is performing fw upgrade, gps and wifi led will be flashing together. 1 4g external antenna port 1 connect the 4g external antenna. 2 wifi 1 connect the wifi external antenna. 3 gps connect the...
P/n: 68060189011 rev.A appendix a: installation guide for vehicle usage. K530 series router is designed for rugged mobile field use that meets mil810g military standard for drops, vibration, humidity, and extreme temperatures. To ensure proper operation of k530 series router, please consider below g...
6 mounting to ensure device is securely mounted, 4 screws can be applied as shown in figure below. Choose a location to mount the device such that good ventilation and easy power supply present. Avoid mounting the device near a spot subject to extreme heat, such as engine room or exposed to direct s...
7 to protect device and prevent the undesirable voltage transients or brown-outs, it’s required to regulate input voltage before feeding it to the power input of device. There are two ways of electrical voltage regulation. One way is to implement a power management block that harnesses battery power...
8 provide power only when ignition switch is turned on. Be aware of battery voltage. It is prohibited to connect to the k530 when voltage is out of operating range. (k530 operation voltage is 9~32v.) do not apply power to k530s when the starter motor is engaged. The power management system should al...
9 there are three types of filters: capacitor, inductor, and pi. The capacitor reduces transients by temporarily storing some electrical energy in the electrostatic field (electrical capacitance caused by voltage differences between two plates with the dielectric material in between) and gradually r...
