1. DL manuals
  2. BandLuxe
  3. Network Router
  4. R529
  5. User Manual

BandLuxe R529 User Manual

Manual is about: LTE/EVDO Rev. A VOIP Router

Summary of R529

  • Page 1

    Table of contents 1 user manual bandluxe r529 lte/evdo rev. A voip router p/n:64013100011 rev.A.

  • Page 2: Table Of Contents

    Table of contents 1 table of contents table of contents ..................................................................... 1 package contents .................................................................... 3 package contents ......................................................................

  • Page 3

    Table of contents 2 qos ................................................................................................... 45 status....................................................................................... 48 4g lte & internet .............................................................

  • Page 4: Package Contents

    Package contents 3 package contents thank you for your purchase of this lte/evdo voip router. This product is designed to access the internet via 4g technology and share the bandwidth through a wi-fi network. It is easy to configure and operate even for non-technical users. This manual contains inst...

  • Page 5: Hardware Overview

    Package contents 4 operating frequency bands o lte: band 2/4/12/17/25 o evdo: bc 0/1/15 supports wan/lan ethernet port dual embedded cellular antenna (for diversity) hardware overview 1 4g external antenna port to connect the main 4g external antenna if needed. 2 reset button to reset the router, pr...

  • Page 6

    Package contents 5 9 sim slot insert sim/usim. Push-push type. 10 4g external antenna port to connect the secondary 4g external antenna if needed. 11 power led solid light indicates that the power supply is connected properly. 12 wifi external antenna port to connect to a wifi external antenna if ne...

  • Page 7: Installation

    Installation 6 installation 1. Connect the power adaptor to the router and connect it to an outlet. 2. Insert your sim card into the slot on the router, making sure the sim card orientation matches the sim card slot, as shown in the picture. 3. Slide the power switch to on..

  • Page 8

    Installation 7 4. One of the following two methods can be chosen to link your router with a pc. A. To link the router with your pc via wi-fi, in microsoft windows, go to control panel > network connections, right-click on wireless network connection, and choose view available wireless networks. Choo...

  • Page 9: Basic Functions

    Installation 8 therouter uses a web-based configuration utility. To access the configuration utility, open a browser (for example internet explorer) and enter the ip address (http://192.168.1.1) or the url (http://r500.Router)for the router in your browser’s address bar. Enter the router user name a...

  • Page 10: Status Indicators

    Installation 9 signal strength type of radio access technology short messaging service (sms) wlan on/off radio access roaming on/off voip status ethernet status subscriber's network operator date & clock connection status status indicators the top of the screen may display the following icons, depen...

  • Page 11

    Installation 10 wifi wifi on wifi off roaming roaming not roaming voip status registered not registered ethernet connected no connection the signal strength icon indicates the relative strength of the radio signal from the nearest base station. The radio access network icon indicates the subscriber’...

  • Page 12: Other Device Information

    Installation 11 other device information upon inserting a sim card, the router begins to search for a signal from the network provider. If the signals from the network provider can not be reached, no service is displayed. If the router is connected to radio access network, then the network provider ...

  • Page 13: Notifications

    Installation 12 automatic configuration of secure wi-fi networks between two wps supported devices. If your wireless adapter supports wps, the wps feature can be a user-friendly and simple process to get your wi-fi network up and running. 1. Enable wifi. 2. Press and hold the wps button for at least...

  • Page 14: Screen Saver Mode

    Installation 13 the device. Screen saver mode the screen automatically enters screen saver mode after 60 seconds of inactivity. The date and time are displayed moving randomly on the screen. Short pressing the wps key or any router state changes such as incoming voip call, lan disconnect, etc. Will ...

  • Page 15: Wizard Setup

    Wizard setup 14 wizard setup user can set preferred settings step by step via the wizard. User can select the preferred language and then set the wizard via basic setting> network setting > basic wi-fi network..

  • Page 16

    15.

  • Page 17: Internet Setup

    Internet setup 16 internet setup basic setting connection type the router can connect to the internet via either lte/3g or ethernet. Select the type of connection with higher priority. The selected type will be used for powering on the router when both types are available. 4g lte setting get latest ...

  • Page 18: Ethernet Setting

    Internet setup 17 roaming connection to allow roaming network connection, select enabled. To block roaming connection, select disabled. Note: rates for roaming can be very high. Contact your mobile network operator for rates and more information. Apn setting the apn (access point name) is provided b...

  • Page 19

    Internet setup 18 password. This option is typically used for dsl services. Service name: enter the isp service name (optional). Keep alive: the router will periodically check your internet connection. If you are disconnected, then the router automatically tries to re-establish your connection. In t...

  • Page 20: Ddns

    Internet setup 19 ddns ddns (dynamic domain name service) is a system that allows the domain name data held in a name server to be updated in real time. It allows an internet domain name to be assigned to a computer with a varying (dynamic) ip address. Before you can use this feature, you need to si...

  • Page 21: Host

    Internet setup 20 host host name this field allows you to assign a host name for the router. Some isps require this name as identification. In most cases, leaving the fields blank will work. Mtu mtu (maximum transmission unit) specifies the largest packet size permitted for internet transmission. To...

  • Page 22: Time

    Internet setup 21 time time setting select the time zone from the drop-down menu according to your current location. Automatically adjust clock for daylight saving changes: select the checkbox to enable daylight saving time..

  • Page 23: Router Setup

    Router setup 22 router setup router password and network setting router access you can change the router ’s password here. Enter the password you want to set in the router password field, and re-enter it in the re-enter to confirm field. Then click save settings. Router ip this is the router ’s ip a...

  • Page 24: Dhcp Service

    Router setup 23 dhcp service dhcp stands for dynamic host control protocol. The dhcp server will automatically assign an ip address to the computers on the lan network. If the router ’s dhcp server option is enabled, make sure there is no other dhcp server on your network. Dhcp reservation to assign...

  • Page 25: Advanced Routing

    Router setup 24 advanced routing nat setup the network address translation (nat) service is a standard that allows multiple computers on a private network to share a single public ip address. Rip the routing information protocol (rip) helps the router dynamically adapt to changes of network routes b...

  • Page 26: Vpn Passthrough

    Router setup 25 1. Click add. 2. In the destination lan ip field,enter the destination ip address that will be assigned to a specific network or host. 3. In the subnet mask field,enter the subnet mask associated with the destination ip. 4. In the interface/gateway ip field, click on the drop down li...

  • Page 27: Wifi Setup

    Wifi setup 26 wifi setup basic wifi network basic wifi network wireless settings enable wifi interface: select this option to enable the wifi feature on the router. Network name (ssid): network name is used for identifying the wireless lan (wlan). Standard channel: the radio channel number. The perm...

  • Page 28

    Wifi setup 27 working mode: from this drop-down menu, you can select the type of wireless standard for your wifi network. Transmit power: the power level for wifi transmission to be used by the router. Rts threshold: this value should remain at its default setting. If inconsistent data flow is a pro...

  • Page 29

    Wifi setup 28 open system this wireless standard uses no authentication. Encryption: choose none or wep from the drop down list. Wep: the router supports two wep (wired equivalent privacy) standards: 64-bit and 128-bit. Select a standard from the drop-down list. The 64-bits encryption requires 10 he...

  • Page 30

    Wifi setup 29 encryption: choose tkip, aes, tkipaes from the drop down list. Aes is a stronger encryption method than tkip. Tkipaes uses either tkip or aes during the connection. Rekey interval: enter a key renewal value to tell the router how often it should change the encryption keys.. Radius serv...

  • Page 31

    Wifi setup 30 the use of a radius authentication server. Encryption: choose tkip, aes, tkipaes from the drop down list. Rekey interval: enter a key renewal value to tell the router how often it should change the encryption keys. Wpapsk type: choose ascii or hex from the drop down list. Wpapsk: enter...

  • Page 32

    Wifi setup 31 selecting deny and entering the appropriate mac address..

  • Page 33: Wps

    Wifi setup 32 wps wi-fi protected setup (wps) is a standard designed to easily setup and automatically configure secure wi-fi networks between two wps supported devices. If the client pc supports wps, the wps feature can be a user-friendly and simple process to get your wi-fi network up and running....

  • Page 34: 4G Lte Setup

    4g lte setup 33 4g lte setup pin verification u/sim's pin verification if your sim card pin protection is enabled, you must enter the pin code for verification. Enter the code in the pin code field, and click verify..

  • Page 35: Pin Management

    4g lte setup 34 pin management u/sim's pin management after your sim card is verified, you can enable or disable the pin protection on your sim card. Select enabled or disabled, and click apply. U/sim's change pin you can change the pin code on the sim card. Enter your original pin code in the old p...

  • Page 36: Sim Management

    4g lte setup 35 sim management u/sim's sim management if the router has sim lock function, you are not allowed to use the isp sim which is not in the sim locked list. You may input the nck code to unlock it. Please contact your isp for further information..

  • Page 37: Preferred Network

    4g lte setup 36 preferred network preferred network network type: in the drop-down menu, select the network type your sim card supports. The available network types are automatically detected when you insert your sim card. If you do not know the network type, select lte first. Network selection to s...

  • Page 38: Security Setup

    Security setup 37 security setup firewall firewall this tab is used to configure a firewall that filters out various types of unwanted traffic on the router ’s local network. Spi firewall protection the spi (stateful packet inspection) firewall is programmed to recognize legitimate packets for diffe...

  • Page 39

    Security setup 38 filter internet nat redirection: to prevent local computers from using public ip addresses to access local servers, select filter internet nat redirection. Filter ident (port 113): this feature keeps port 113 from being scanned by devices outside of your local network. Web filter s...

  • Page 40: Internet Access Policy

    Security setup 39 internet access policy access can be managed by a policy. Use the settings on this screen to establish and access policies. To display a policy’s settings, select the policy from the drop-down menu..

  • Page 41

    Security setup 40 to create an internet access policy: 1. Select a number from the access policy dropdown menu. 2. Enter a policy name in the field provided. 3. To enable the policy, select enabled. 4. To select which pcs are affected by the policy, click edit list. The list of pcs screen appears. Y...

  • Page 42

    Security setup 41 only add up to 4 applications.) enter the information in the application name and port range fields and select the protocol type, then click add. To modify an existing application, select the application from the blocked list, make the appropriate changes and click modify. To delet...

  • Page 43:   Single Port Forward

    Security setup 42  single port forward single port forwarding port forwarding allows you to set up public services on your network, such as web servers, ftp servers, e-mail servers, and other specialized internet applications. To forward a single port: 1. Click add. 2. In the application field, ent...

  • Page 44: Port Range Forward

    Security setup 43 port range forward port range forwarding port range forwarding allows you to set up public services on your network, such as web servers, ftp servers, e-mail servers, and other specialized internet applications. To forward a port range: 1. Click add. 2. In the application field,ent...

  • Page 45: Port Range Trigger

    Security setup 44 port range trigger port range triggering this feature allows the router to watch outgoing data for specific port numbers. The router remembers the ip address of the computer that sends the matching data, so that when the requested data returns through the router, the data is pulled...

  • Page 46: Qos

    Security setup 45 qos qos control quality of service is the ability to provide different priorities to different applications, users, or data flows, or to guarantee a certain level of performance to a data flow. Wireless wmm support: if no devices on your network support wmm, select disabled. Otherw...

  • Page 47

    Security setup 46 category there are four categories available. Select one of the categories and proceed to the instructions for your selection. To add an online games or applications: 1. Select the appropriate online games or applications. 2. Select the appropriate priority: high, medium, normal, o...

  • Page 48

    Security setup 47 summary this lists the qos entries you have created for your applications and devices. Select edit to edit an item or remove to remove the item. Preset items cannot be edited..

  • Page 49: Status

    Status 48 status 4g lte & internet signal quality when you access the internet via a mobile network, click refresh to show the signal strength. U/sim status your sim card verification status is shown in this area. Clicking pin unlock displays the pin verification tab..

  • Page 50: Register Network

    Status 49 register network network name: this shows the name of your network operator. Network technology: this shows the network technology you are currently using. Home/roaming: this indicates whether the router is in home or roaming status. Clicking select network displays the preferred network t...

  • Page 51: Router

    Status 50 router firmware information firmware version: this is the router ’s current firmware. Modem version: this is the lte/3g module ’s current firmware. Current time: this shows the time, as you set on the optional tab. Local network local mac address: this is the router ’s mac address, as seen...

  • Page 52: Wifi Network

    Status 51 subnet mask: this shows the current subnet mask being configured for your local network. Dhcp server: the status of the dhcp server function is displayed here. Clicking the change button displays the network setting tab. Start ip address: this shows the beginning of the range of ip address...

  • Page 53: Telephony

    Telephony 52 telephony voip voip voip allows the user to connect a standard analog phone to the router via the rj-11 jack and make voice calls over the internet. Use the information provided by your isp or voip service provider to complete the relevant fields..

  • Page 54: Appendix A: Faq

    Appendix a: faq 53 appendix a: faq q: what does the power led indicate? A: the power led with solid yellow indicates the router is on. Q: how to connect to the router? A: 1. Connect an ethernet cable between the pc/nb and the router. 2. Use wifi to connect. Q: what’s the default “user name” and “pas...

  • Page 55

    Appendix a: faq 54 q: why can't i link on the gui? A: if you have changed your wifi security, ssid, local ip address, you have to repair your network to get a new ip so that you can link the gui. Xp: if you are a wifi user, click network connections and right click on wireless network connection, cl...

  • Page 56

    Appendix a: faq 55 vista/win 7: 1. If you are a wifi user, please click network and sharing center > manage network connections > wireless network connection > diagnose 2. Please click reset the network adapter “wireless network connection” and it will began to repair. 3. If you use local area conne...

  • Page 57

    Appendix a: faq 56 q: how to setup my wifi settings from gui? A: entering the gui first then click wifi > basic wifi network, you can setup your basic wifi settings here. If you want to set your wifi security please click “basic wifi network ”. There are nine wireless security mode options supported...

  • Page 58

    Appendix a: faq 57 q: what should be noted when 802.11n is selected? A: for higher data transfer throughput, ensure that the router is not configured to use wep or tkip a: is there any limitation for the wps function? Q: if you want to use wps function, make sure that the router is not configured to...

  • Page 59

    Appendix a: faq 58 q: why can’t i use vpn via router? A: you may check your office ip settings, the ip settings must not conflict with each other. Q: how do i do the settings when i use xdsl to link the router? A: 1. Pppoe: go to the gui internet > basic setting, select ethernet as connection type,>...

  • Page 60: Appendix B: Specification

    Appendix b: specification 59 appendix b: specification note: specifications are subject to change without notice. Physical wi-fi 802.11 b/g/n (2x2 mimo) modem embedded, lte/evdo modem chipset qualcomm mdm9200 + rtr8600 dimension (lxwxh, mm) 99 x 127.5 x 24.1 mm weight (g) 170g interface power on/off...

  • Page 61

    Appendix b: specification 60 antenna port wi-fi antenna embedded wi-fi external antenna yes x 1 router features security multiple vpn pass-through (ipsec, pptp, l2tp), internet access restriction, firewall, dos prevention, traffic and event logging nat-napt port forwarding, port triggering, dmz, mul...

  • Page 62

    Appendix b: specification 61 automatic apn / id / password settings yes apn updatethrough browser-based gui yes support fw version upgrade yes. System protection password protected system reset to factory default, password protected administrator and user access authority (provisioning, configuratio...

  • Page 63: Information and Glossary

    Appendix c: important safety information and glossary 62 appendix c: important safety information and glossary europe – eu declaration of conformity european union notice products with ce marking comply with the r&tte directive (99/5/ec), the emc directive (2004/108/ec), and the low voltage directiv...

  • Page 64: Interference Statement

    Appendix c: important safety information and glossary 63 etsi en 301 489-17 electromagnetic compatibility and radio spectrum matters (erm); electromagnetic compatibility (emc) standard for radio equipment and services; part 17: specific conditions for 2.4 ghz wideband transmission systems. Etsi en 3...

  • Page 65

    Appendix c: important safety information and glossary 64 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation of the device. Fcc rf radiation exposure statement: 1. This transmitter must ...

  • Page 66: Glossary

    Appendix c: important safety information and glossary 65 glossary apn (access point name/network): provides routing information. Consists of: network id: identifies the external service requested by an user. Mobile network operator id: specifies routing information. Arfcn (absolute radio frequency cha...