Summary of BEOLAB 11
Page 1
Beolab 11 guide.
Page 2
Warning: to reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Do not expose this equip ment to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the equipment. To completely disconnect this equipment from the...
Page 3
Daily use when you have finished setting up the subwoofer as described on the following pages, connect the entire system to the mains supply. The indicator lights up in red, indicating that the subwoofer is in standby, ready to be used. The subwoofer is designed to be left in this standby mode when ...
Page 4
Set up the subwoofer we recommend that you follow this procedure: – disconnect your system from the mains supply. – place the subwoofer according to the guidelines in ‘adapt the subwoofer to your setup’ (p. 8). For information on how to fasten the subwoofer to the optional accessories, refer to the ...
Page 5
For safety reasons you must fasten the mains lead behind the mains cord bracket. Mains cord: the supplied mains cord and plug are specially designed for the product. If you change the plug or damage the mains cord, you must buy another from your bang & olufsen retailer! Cable connections power link ...
Page 6
Connect your speaker system connect the subwoofer to your system using the enclosed power link cable. You gain access to the subwoofer socket panel from the bottom, see page 5. For specific information about the other speakers and units in your bang & olufsen system, refer to the guides enclosed wit...
Page 7
R l out out in 'stereo system' r l r l in subwoofer rear rear front front 'surround system' out r l out in out r l in 7 routing the signals through from speaker to speaker: to avoid cables running from both front speakers to the subwoofer, you may choose to route the signal through from speaker to s...
Page 8
Adapt the subwoofer to your setup placement is flexible and easy with the subwoofer. Due to its relative small size it can easily be integrated in most home environments, and may be placed almost anywhere you wish in the room. To obtain the most natural sound you should place the subwoofer on the fl...
Page 9
Adapt the subwoofer to your setup setting the ext. And int. Bass management switch depending on your setup, you have to make settings for the bass management. – set the switch to ‘ext. Bass management’ if the subwoofer is connected to a subwoofer socket on a product and no speakers are connected to ...
Page 10
When using beolab 4 with your subwoofer. When possible use a power link cable and set the power link switch to left or right. When using a mini jack cable, always set the line in switch to line. Do not use the pc setting. Set the switch on your subwoofer to 0db. Note! Do not use the setting -db on y...
Page 11
Waste electrical and electronic equipment (weee) – environmental protection electrical and electronic equipment, parts and batteries marked with this symbol must not be disposed of with normal household wastage; all electrical and electronic equipment, parts and batteries must be collected and dispo...
Page 12
3510431 0912.