Bang & Olufsen beolab 12 User Manual - page 4

Set up the loudspeakers

We recommend that you follow 

this procedure: 

–  Disconnect your system from the 

mains supply. 

–  Place the loudspeakers according 

to the guidelines in ‘Connections 

and settings’, see page 6.

For 

information on how to fasten 

the loudspeakers to the optional 

accessory, refer to the guide 

enclosed with the accessory. 

–  Set the switches to the correct 

settings. This is explained in 

‘Connections and settings’,  

see pages 5–6. 

–  Connect your speaker system.

–  Connect the entire system to the 

mains supply again. 

Cautions

–  Make sure that the loudspeakers 

are placed and connected in 

accordance with the instructions 

in this Guide. To prevent injury, 

use Bang & Olufsen approved 

wall brackets only! 

–  The loudspeakers can only be 

switched off completely by 

disconnecting them from the 

mains supply. 

–  Do not expose this equipment to 

dripping or splashing and ensure 

that no objects filled with liquids, 

such as vases, are placed on the 

equipment.

–  No naked flame sources, such as 

lighted candles should be placed 

on the apparatus.

–  The loudspeakers are intended 

for indoor use in dry, domestic 

environments only, and for use 

within a temperature range of 

10–40º C (50–105º F). 

–  Remember that all loudspeakers 

in a setup must be connected to 

a mains outlet, and that they are 

designed to be connected to the 

mains at all times, as this allows 

them to switch on automatically. 

–  Do not attempt to open the loud-

speaker. Leave such operations to 

qualified service personnel! 

–  The supplied mains cord and 

plug are specially designed for 

the product. If you change the 

plug or damage the mains cord, 

you must buy another from your 

Bang & Olufsen retailer!

4

The product identification label is 

placed on the rear part of the 

loudspeaker.