Bang & Olufsen BeoLab 2 Manual - page 9

9

Setting the POSITION switch

Use the POSITION switch to ensure that the

bass response suits the placement of

BeoLab 2, and thus the surroundings.

Which switch setting to choose depends on

the distance from BeoLab 2 to the walls

and corners of the room.

The POSITION switch has three settings:

CORNER: Use this setting if BeoLab 2 is placed

in a corner – shown by the dark grey areas

in the illustration.

WALL: Use this setting if BeoLab 2 is placed

closer than approx. 50 cm (20”) to a wall,

and no closer to a corner than approx. 

150 cm (60”) – shown by the medium grey

areas along the walls in the illustration.

FREE: Use this setting if BeoLab 2 is placed

more than approx. 50 cm (20”) from the

wall – shown by the light grey area in the

illustration.

The dimensions mentioned are guidelines only.

You may, of course, set the switch to any of

the three positions you prefer.

CORNER

WALL

FREE

~ 50 cm

20"

~ 150 cm

60"

Never place BeoLab 2 behind your listening

position. We recommend that you avoid

placing any of your loudspeakers in the area

inside the thin dotted line.