Summary of BeoLab 3
Page 1
Guide beolab 3.
Page 2
Acoustic lens technology – manufactured under license from sausalito audio works. To get access to the approval labels, remove the beolab 3 top cap. Note! Prolonged listening at high volume levels may cause hearing damages warning: to prevent fi re or electric shock, do not expose this appliance to ...
Page 3
Daily use when you have fi nished setting up the loudspeakers as described on the following pages, connect the entire system to the mains. The loudspeakers are designed to be left in standby when not in use. Switching on and off when you switch on your system, the loudspeaker switches on simul taneo...
Page 4
Setting up beolab 3 we recommend that you follow this procedure: – disconnect your system from the mains. – place the loudspeaker according to the guidelines on these two pages. For information on how to fasten the loudspeaker to the optional accessories, refer to the guide enclosed with the accesso...
Page 5
A b c ~ 3 m (10') 30 cm (12") 0 150 cm (60") 90 cm (35") a b c 5 for optimal sound performance make sure that the loudspeaker is directed towards your preferred listening position. The heights shown are guidelines, and will vary according to the distance from your preferred listening position to the...
Page 6
Cable connections position switch this switch has three settings: free, wall, and corner. Which setting to use is explained in ‘adapt beolab 3 to your room’ (pp. 8–10). Setup switch this switch has three settings: right, left, and line. Set the switch to right or left, when connecting loudspeakers i...
Page 7
Power link mk 3 left right 1 left right 2 7 power link connections: these connections carry both the right and left sound signals. There fore, the cables may be run in two ways: 1 run a power link cable from the bang & olufsen system directly to each loudspeaker. Or 2 use a power link adapter (optio...
Page 8
Adapt beolab 3 to your room the position switch when a loudspeaker is placed in a corner, the bass level is boosted compared to the bass level from a loudspeaker placed in a more free-standing position. To fi lter out this natural bass boost, the loudspeaker has a switch marked position. The purpose...
Page 9
Free wall corner ~ 3 m 10' ~ 3 m 10' 9 how to measure? The distances referred to, are measured as shown here (the loudspeaker seen from above). The distances are meant as guidelines, and you may, of course, set the position switch to any of the three settings you prefer. To obtain the most natural s...
Page 10
>> adapt beolab 3 to your room setup examples here are three examples which show how to set the position switch on each loudspeaker in different setups. If you have a beolab 2 subwoofer setup… as explained in the beolab 2 guide, the subwoofer has a setup switch which can be set to 1, 2, or 3. This w...
Page 11
3506393 0501 printed in denmark by bogtrykkergården a-s, struer this product fulfils the conditions stated in the eeu directives 89/336 and 73/23. Technical specifi cations, features and the use thereof are subject to change without notice! For the canadian market only! This class b digital apparatu...
Page 12
Www.Bang-olufsen.Dk.