Beolab 4 guide.
Warning: to reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Do not expose this equip- ment to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the equipment. To completely disconnect this equipment from th...
Daily use when you have fi nished setting up the loudspeakers as described on the following pages, connect the entire system to the mains. The indicator lights turn red, to indicate that the loud speakers are in standby mode, ready for use. The loud speakers are designed to be left in standby mode w...
Set up the loudspeakers we recommend that you follow this procedure: – disconnect your system from the mains. – connect the loud speakers and set the line in–power link switch on each loud speaker as explained in ‘cable connections’ (pp. 6–7). – set the position switch to the correct setting on each...
Loudspeaker front and side panels with each loudspeaker you will get one front panel and two side panels. These panels must be fastened to the loudspeaker before use. The front panel is marked with a bang & olufsen name plate. Each of the panels have three small pegs on the rear. Fasten the panels b...
Cable connections the loudspeakers can be used with bang & olufsen audio, video and link systems. They may also be used with non- bang & olufsen audio or video systems, or connected to a computer. About the two switches … the position switch has three settings. Which setting to use depends on the po...
Power link connections: these connections carry both the right and left sound signals. There fore, you can: 1 run a power link cable from the bang & olufsen system directly to each loud speaker. Or 2 use a power link adapter (optional accessory, available from your bang & olufsen retailer). Run a ca...
Adapt the loudspeakers to your room when a loudspeaker is placed in a corner, or close to a wall or ceiling, the bass level is boosted compared to the bass level achieved from a loud speaker placed in a more free-standing position. Use the position switch to ensure that the bass level suits the plac...
Position 3 position 1 position 2 position 2 position 3 ~ 50 cm 20" ~ 50 cm 20" ~ 50 cm 20" ~ 50 – 70 cm 20 – 28" 9 position zones: the position switch has three settings marked 1 , 2 , and 3 . The settings corresponds to the position zones shown here. The distances are meant as guide- lines, and you...
>> adapt the loudspeaker to your room 10 example 2: this illustration shows the position zones projected onto the ceiling. The loud speakers – on ceiling brackets – are placed within position zone 2 (darker grey zones), and therefore the position switch should be set to 2 on both loud- speakers. If ...
This product fulfils the conditions stated in the eeu directives 89/336 and 73/23. Technical specifications, features and the use thereof are subject to change without notice! For the canadian market only! This class b digital apparatus meets all require ments of the canadian interference-causing eq...
Www.Bang-olufsen.Com.
