Summary of BeoLab 7-6
Page 1
Beolab 7-6 guide.
Page 2
Warning: to reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Do not expose this equip- ment to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the equipment. To completely disconnect this equipment from th...
Page 3
Daily use when you have finished setting up the loud speaker as described on the following pages, connect the entire system to the mains. Loudspeaker protection the loud speaker is equipped with a thermal protection system which prevents damage from overheating. If an error occurs – or the speaker u...
Page 4
Set up the loudspeaker we recommend that you follow this procedure: – disconnect your bang & olufsen system from the mains supply. – fasten the loudspeaker as explained on the next page. – connect the loudspeaker and set the position switch as explained in ‘cable connections’ (pp. 6–7). – connect th...
Page 5
To fasten the loudspeaker here is explained how to fasten the loud speaker to a bang & olufsen stand. A remove the two small covers (if any) on the stand. Press each cover as shown, and they will come loose. B fasten the bracket to the stand. Use the four longest screws (m5 × 25 mm). C fasten the lo...
Page 6
Cable connections in this guide is explained how to set up the loudspeaker in a setup with beovision 7. If used in a setup not including beovision 7, you will require a mains cord and a power link cable. These cables are avail able as optional accessories from your bang & olufsen retailer. The socke...
Page 7
The position switch when a loudspeaker is placed in a corner or close to a wall, the bass level is boosted compared to the bass level from a loudspeaker placed in a more free-standing position. To remove this excessive bass boost, use the position switch to ensure that the bass level suits the place...
Page 8
To get access to the approval labels, remove the loudspeaker front grill push the front grill towards the left (~ 10 mm). The front grill can now be removed. Note: when attaching the front grill again, make sure that all five ‘attachpoints’ engage with the corresponding brackets on the loud speaker...
Page 9
Waste electrical and electronic equipment (weee) – environmental protection electrical and electronic equipment, parts and batteries marked with this symbol must not be disposed of with normal household wastage; all electrical and electronic equipment, parts and batteries must be collected and dispo...
Page 10
For the us-market only! Note: this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harm ful interference in a residential installation. This equipment ...
Page 12
3509947 0908 www.Bang-olufsen.Com.