Summary of BEOLAB 8002
Page 1
Beolab 8002 guide.
Page 2
Warning: to reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Do not expose this equip ment to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the equipment. To completely disconnect this equipment from th...
Page 3
Daily use when you have finished setting up the loud speakers as described on the following pages, connect the entire system to the mains supply. The indicator lights up in red, indicating that the loud speakers are in standby, ready to be used. The loud speakers are designed to be left in this sta...
Page 4
Set up the loudspeaker we recommend that you follow this procedure: – disconnect your system from the mains supply. – place the loudspeakers in your setup. – set the switches to the correct setting. This is explained in ‘adapt the loudspeakers to your setup’ (page 6). – connect your speaker system. ...
Page 5
Cable connections the loudspeakers can be used with bang & olufsen audio, video and link systems. They may also be used with nonbang & olufsen systems. For specific information about the sockets on your system, refer to the guide enclosed with the system. Mains cord: the supplied mains cord and plu...
Page 6
Adapt the loudspeakers to your setup the loudspeakers may be placed almost anywhere in your room. However, the most natural sound is obtained if they are set up as explained in this section. Setup switch this switch has three settings: left, right and line. Set the switch to left or right when conne...
Page 7
The position switch has three settings: free, wall and corner. Free use this setting if the loud speaker is placed more than 15 cm (6") from the wall, and no closer to a corner than 50 cm (20") – shown by the large light grey area in the illustration. Wall use this setting if the loud speaker is pla...
Page 8
>> adapt the loudspeakers to your setup cable cover: the rubber tube packed with the loud speakers is a cable cover specially designed for the loudspeakers. Use the enclosed tool to “zip up” the cable cover when you have placed both the mains cord and the power link cable inside it. The special adap...
Page 9
Waste electrical and electronic equipment (weee) – environmental protection electrical and electronic equipment, parts and batteries marked with this symbol must not be disposed of with normal household wastage; all electrical and electronic equip ment, parts and batteries must be collected and dis...
Page 10
For the canadian market only! This class b digital apparatus meets all require ments of the canadian interferencecausing equipment regulations. For the us-market only! Note: this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the f...
Page 12
3510507 1002.