Bang & Olufsen BeoSound 1 Manual
Summary of BeoSound 1
Page 1
Beosound 1 guide.
Page 2
Warning: to prevent fire or electric shock, do not expose this appliance to rain or moisture. This symbol indicates that a dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the...
Page 3
A movable music centre place your beosound 1 where you like. The compact design enables you to bring it with you anywhere. Beosound 1 gives you an excellent sound experience no matter how near or far you are from the speakers. The sound is optimised and no additional settings are required. Connect b...
Page 4
Before you start… placement allow enough space above the beosound 1 to enable the built-in aerial to extend and the cd compartment to raise. Make sure that the beosound 1 is always placed on a firm, stable surface. The beosound 1 is designed for indoor use in dry, domestic environments only, and for ...
Page 5
Contents of the guide key to using this guide use this key to identify what a button or a display looks like in an instruction sequence. Buttons on the beosound 1 close-up operation panel or on the beo4 remote control display on beosound 1 beosound 1 6 buttons on the close-up operation panel basic d...
Page 6
Your key to using beosound 1 operation is easy. The buttons essential to daily operation are on the right-hand side, while those on the left-hand side have secondary functions. Just press a single button to listen to sound of your choice. The display will show your choice. Aerial is used to extend a...
Page 7
Beosound 1 presents essential audio sources in a compact and easily operated way. The compact design and the built-in handle lets you to take the music with you. The radio finds the first available station the first time you press the radio button. Press aerial to extend or retract the built-in aerial....
Page 8
Daily operation of radio and cd player to listen to the radio, just press one of the radio buttons, the radio will start playing on the radio station you last listened to. You extend the built-in aerial by pressing the aerial button. You can store up to 59 different radio stations in your beosound 1...
Page 9
Adjust volume you can turn the volume up and down at any time. If you store a volume level, the beosound 1 starts at this level next time it is switched on. The maximum volume level is 72, but the maximum level that can be stored is 60. Reading the display the luminous display will keep you informed...
Page 10
Make beosound 1 stop at a specific time you can decide in advance how long you want to listen to the radio. Beosound 1 can switch automatically to standby when you are done. You set the number of minutes – 15, 30, 45, 60, 90, 120 or 00 – that you would like the radio to play before it switches to sta...
Page 11
The beosound 1 has a built-in 24 hour clock. You must set the clock yourself. If you want to make use of the wake-up timer function described on the next page, you must first make sure that the built-in clock in the beosound 1 has been set correctly. If beosound 1 has been disconnected from the mains...
Page 12
You can make beosound 1 wake you up in the morning. The wake-up timer is a once-only timer. Like an alarm clock it is deleted once it has been executed. While the timer is executed, the time is shown in the display, when you operate or switch off your beosound 1, the display returns to the mode you ...
Page 13
Check or delete a wake-up timer you can call up the settings for the wake-up timer in the display to check the time or to delete the wake-up timer. While beosound 1 is in standby, press and hold or until the time for the wake-up timer is shown in the display, the digits are blinking press store to c...
Page 14
Play favourite cd tracks only if you only like some tracks on a cd, you can set beosound 1 to ignore the ones you do not like. You make this selection by “deleting” the tracks you do not want to listen to. The cd player remembers your selection as long as you leave the cd in the cd compartment. Once...
Page 15
15.
Page 16
You can let the radio find the available radio stations for you, and then store them on a program number of your own choice. You can also tune the radio manually and find specific stations yourself. To tune in stations, the frequency must be shown in the display. Any stored radio station can be deleted...
Page 17
Delete radio stations you can delete the stored radio stations any time. Press radio to switch on the radio press or to find the requested radio station press delete twice to delete the radio station playing. The display will blink and the radio will switch to the next program number 17 radio radio d...
Page 18
Beo4 remote control press radio to switch on the radio press cd to switch on the cd player press a tape to activate any extra equipment connected to the aux socket use the number buttons to key in the exact radio program number or cd track number press to program a wake-up timer press to step throug...
Page 19
19.
Page 20
Use the pin code system it is your own choice whether or not to activate the pin code system. However, if you choose to activate the system, your beosound 1 is protected against theft with a fourdigit pin code. The use of a pin code means that if your beosound 1 is disconnected from the mains for mo...
Page 21
Change your pin code you can change your pin code at any time. However, for security reasons it is only possible to change the pin code five times within a period of 3 hours. You must enter your current pin code before changing the code. Press twice when the set is in standby press stop to key in the...
Page 22
For your information… your needs as a user are given careful consideration during the design and development process of a bang & olufsen product and we strive to make our products easy and comfortable to operate. Therefore, we hope that you will take the time to tell us about your experiences with y...
Page 23
Note: this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can r...
Page 24
Www.Bang-olufsen.Com.