Bang & Olufsen Beosound 2000 User Manual - page 9
9
F
F
E
↑
F
1
E
2
To install the wall bracket:
• Make your measurements and
decide where to place the
wall bracket, using the above
diagram.
• Mark and drill the holes in
the wall, using the wall
bracket as a template.
• Fasten the wall bracket to the
wall, using wall plugs and
screws as appropriate.
• Attach the spacer (E) to the
rear grill of the BeoSound
2000 music system.
• Hang your music system,
using the two holes (F), onto
the two hooks which now
protrude from the wall.
NOTE: Make sure that the holes
are properly engaged with the
notch in each hook!
Important installation note!
Interior walls are often con-
structed of gypsum panels –
known as drywall or wall board
– secured to vertical studs.
Gypsum is not a satisfactory
material to support the weight
of the BeoSound 2000 system.
If you wish to hang your system
on a gypsum wall, using the
wall bracket, we recommend
that at least one mounting
screw be a lag screw, which is
screwed securely into a vertical
wooden wall stud.
* The optional accessories for
the BeoSound 2000 are avail-
able at your Bang & Olufsen
dealer.