Bang & Olufsen BeoSound 8 Manual - page 7
Important!
– Warning! Prolonged listening at
high volume levels may cause
hearing damage.
– Avoid placing the product in
direct sunlight or direct artificial
light, such as a spotlight.
– Make sure that the product is set
up, placed and connected in
accordance with the instructions.
– Place your product on a firm
surface or stand where you want
it placed permanently. Use Bang &
Olufsen approved stands and
wall brackets only!
– Do not subject the product to high
humidity, rain or sources of heat.
– The product is developed for
indoor use in dry, domestic
environments only. Use within a
temperature range of 10–40°C
(50–105°F).
– Leave enough space around the
product for adequate ventilation.
– Do not attempt to open the
product. Leave such operations
to qualified service personnel.
– The product can only be switched
off completely by disconnecting
it from the wall socket.
Cleaning
Wipe dust off the surfaces using a
dry, soft cloth. Do not use liquid
cleaners or aerosol cleaners.
To remove stains or dirt, use a soft,
damp cloth and a solution of water
and mild detergent, such as
washing-up liquid.
Replace the speaker cover
> Remove the front foot.
> Insert a small pin, such as a
straightened paper clip in the
hole under the front foot and
push the speaker cover off.
7
Technical specifications, features
and the use thereof are subject to
change without notice.