Summary of PresencePlus P4 EDGE
Page 1
Printed in usa 12/04 p/n 118000 rev. A models included: • geo • edge.
Page 2
2 p/n 118000 rev. A banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 warning . . . Not to be used for personnel protection never use this product as a sensing device for personnel protection. Doing so could lead to serious injury or death. This product ...
Page 3: Quick Start Overview
P/n 118000 rev. A 3 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 introducing presenceplus p4 the presenceplus p4 (or the sensor) is an easy-to-use vision sensor with advanced visual inspection capabilities. With minimal knowledge of vision, a user c...
Page 4: Connections
4 p/n 118000 rev. A banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 components/ connections components/ connections cable connections 1. If a light will be powered by the sensor, connect it to the 3-pin light connector. A. Caution: if the light is powe...
Page 5: Connections
P/n 118000 rev. A 5 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 light connector (banner lights only) 1 = brown 24v 2 = n/a 3 = blue (ground) 4 = strobe ethernet ntsc video to monitor 12-pin discrete i/o power/ground rs-232 serial (see pin assignmen...
Page 6: Configuration
6 p/n 118000 rev. A banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 sensor configuration sensor configuration typical ip address: 192.168.0.2 step 3 step 3 pc configuration 1. Ethernet communication, configure the ip address of your computer. 2. Instal...
Page 7: Startup
P/n 118000 rev. A 7 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 sensor startup sensor startup step 5 step 5 launching software 1. Start the presenceplus program by clicking start > program files > presenceplus. 2. At start-up, presenceplus p4 will ...
Page 8: Software Setup
8 p/n 118000 rev. A banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 software setup use the main menu toolbar to navigate the presenceplus p4 options. Proceeding from left to right, the buttons in the menu toolbar step through the process of creating an...
Page 9: Tool Options
P/n 118000 rev. A 9 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 tool options note: tool availability depends on p4 model. Creating inspections creating inspections this screen automatically configures the parameters chosen in the tools screen. A. C...
Page 10: Inspections
10 p/n 118000 rev. A banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 running inspections running inspections viewing results display options select an inspection to run, and view the results of the inspection. To select an inspection, (in the select ta...
Page 11: Configuration
P/n 118000 rev. A 11 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 sensor configuration sensor configuration step 7 step 7 system setup use the system setup screen to change discrete i/o, the communication port, the product change, the strobe output ...
Page 12: Maintenance
12 p/n 118000 rev. A banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 maintenance maintenance tasks include keeping the hardware free of dust and dirt and updating the presenceplus software as new versions become available. Cleaning the sensor regularly...
Page 13: Troubleshooting
P/n 118000 rev. A 13 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 senso r troubleshooting sens or troubleshooting troubleshooting problem cause/solution • error code is displayed on pc. • a list of error codes and potential causes and solutions are ...
Page 14: Specifications
14 p/n 118000 rev. A banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 specifications models right-angle in-line geo: p4gr edge: p4er geo: p4gi edge: p4ei part numbers geo: 71431 edge: 73599 geo: 71432 edge: 73600 dimensions * measured length does not in...
Page 15: Specifications, Continued
P/n 118000 rev. A 15 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 memory stores up to 12 inspection files power voltage: 10-30v dc current: 500 ma max. Acquisition 500 frames per second max. Image size: 126 x 98 pixels levels of gray scale: 256 imag...
Page 16: Models/tools
Banner engineering corp., 9714 tenth ave. No. Minneapolis, mn 55441 phone: 763.544.3164 www.Bannerengineering.Com email: sensors@bannerengineering.Com p/n 118000 rev. A models/tools presenceplus p4 models user’s manual part number* tools locate geo find geo count edge object measure test comm. Geo 1...