Dx80 quick start guide a setup guide for the dx80 wireless system printed in usa 09/06 p/n 128185 introducing the banner dx80 wireless system the dx80 wireless system provides continuous monitoring without the burden of wiring or conduit installation, and can operate independently or in conjunction ...
Dx80 quick start guide p/n 128185 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 2 1 2 3 4 5 6 7 setting up 1 2 3 4 5 6 7 dx80 gateway and node front-panel interface rotary switch 1 (left) sets the network id (nid) to a value from 0 to 15 rotary switc...
P/n 128185 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 dx80 quick start guide 3 setting up dx80 gateway and node wiring chamber 1 2 3 4 5 6 7 8 8 1 2 3 4 5 6 7 port, npt gland or plug 1/2 npt threaded port can accept provided plug. Housing rugged, ...
Dx80 quick start guide p/n 128185 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 4 getting started – network setup the banner dx80 wireless system is a network of devices consisting of a gateway and node(s). The network is defined by the network id (n...
P/n 128185 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 dx80 quick start guide 5 getting started – apply power to apply power to the gateway , connect 10-30v dc cable as shown. To apply power to the node , connect 10-30v dc cable or dx81 battery mod...
Dx80 quick start guide p/n 128185 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 6 getting started – verify communications verify led 1 is on green. Verify led 1 is flashing green. Led 2 is off. Until communication is established with the gateway, the...
P/n 128185 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 dx80 quick start guide 7 getting started – site survey remove gateway rotary switch access cover. Change right rotary switch setting to 1 the gateway is enabled to read the status of node 1 and...
Dx80 quick start guide p/n 128185 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 8 getting started – host network host network – gateway installing a host-connected network is similar to installing a standard dx80 wireless system, except that all devi...
P/n 128185 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 dx80 quick start guide 9 getting started – host network on the gateway, move to the “device configuration” menu to navigate to the *dvcfg (device configuration) menu, see page 12. Single-click ...
Dx80 quick start guide p/n 128185 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 10 clear communication paths dx80 quick tips the external antenna should be vertically- oriented for optimal rf communication. In addition, consider the height of dx80 po...
P/n 128185 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 dx80 quick start guide 11 dx80 gateway & node dimensions dimensions 65.0 mm (2.56˝) top view bottom view side view 65.0 mm (2.56˝) 80.3 mm (3.16˝) 59.3 mm (2.33˝) 80.8 mm (3.18˝) 126.7 mm (4.99...
Dx80 quick start guide p/n 128185 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 12 configuration dx80 gateway setup menu when power is applied, the dx80 immediately enters run state (gateway or node). Run state is the normal operating mode for all de...
P/n 128185 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 dx80 quick start guide 13 configuration dx80 node setup menu when power is applied, the dx80 immediately enters run mode (gateway or node). Run mode is the normal operating mode for all devices...
Dx80 quick start guide p/n 128185 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 14 troubleshooting rf link time-out & recovery banner dx80 wireless devices employ a deterministic link time-out method to address rf link interruption or failure. As soo...
P/n 128185 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 dx80 quick start guide 15 troubleshooting in a host-connected dx80 system, a link time-out will result in an error code (53 or 0x35xx) being placed in the node-specific device message modbus re...
Dx80 quick start guide p/n 128185 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 16 troubleshooting troubleshooting a wireless network can be hindered by radio interference as well as obstructions in the path of the receiver and transmitter. To achiev...
P/n 128185 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 dx80 quick start guide 17 compliance fcc certification the dx80 module complies with part 15 of the fcc rules and regulations. Fcc id: ue300dx80-2400 this device complies with part 15 of the fc...
Dx80 quick start guide p/n 128185 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 18 notes p/n 128185 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 18.
P/n 128185 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 dx80 quick start guide 19 p/n 128185 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 notes 19.
Warranty: banner engineering corp. Warrants its products to be free from defects for one year. Banner engineering corp. Will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty doe...
