Banner MINI-BEAM Installation Manual - Mini-Beam
2
P/N 69942 rev. A
Banner Engineering Corp.
•
Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Installation
Guide
MINI-BEAM
®
ac-Voltage Series
Models with suffixes E, EL, EPD, R, RL, RPD, LV,
LVAG, LP, D, C, C2, CV, CV2, and CVG
Models with suffix DBZ and W
Sensor Features
(shown with gasketed acrylic cover removed)
Models with suffix F and FV
Models with suffix FP
Gain (Sensitivity) Adjustment Screw
Alignment Indicator Device (AID)*
Light/Dark Operate Select Switch
Clockwise: Light Operate
(outputs conduct when sensing
light is received).
Counterclockwise: Dark Operate
(outputs conduct when sensing
light is not received).
*U.S. Patent no. 4356393
12.2 mm (0.48")
Mounting Peg
(ø 6.3 mm x 2.5 mm)
ø 3 mm Clearance (2)
M18 x 1 x 15 mm Thread
(Mounting Nut Supplied)
3.2 mm
(0.13")
27.4 mm (1.08")
30.7 mm
(1.21")
24.1 mm
(0.95")
19.1 mm
(0.75")
66.0 mm
(2.60")
2 m (6.5') Cable
Bezel
18.0 mm
(0.71")
51.8 mm
(2.04")
13.2 mm (0.52")
M18 x 1 x 19 mm Thread
(Mounting Nut Supplied)
Fiber Optic Fitting
69.9 mm
(2.75")
31.2 mm (1.23")
54.8 mm
(2.16")
Fiber
Optic
Fitting
22.3 mm
(0.88")
16.2 mm
(0.64")
QD Models
20.0 mm
(0.79")
12 mm Thread
Quick-disconnect
NOTES:
• Please observe proper ESD precautions
(grounding) when adjusting Gain pot or
LO/DO switch.
• When turning the Light/Dark Operate Select
switch, be careful not to damage the small
tabs on the switch.
Dimensions