Printed in usa 10/06 p/n 129465 hinge wing safety interlock switches si-hg63 series safety interlock switches attached to a load-bearing hinge models features • safety switch is integrated into a highly robust pbt housing and screwed onto the fine-cast stainless steel hinge. • safety switching point...
Hinge switches – si-hg63 series p/n 129465 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 important information regarding the use of safety switches in the united states, the functions that banner safety switches are intended to perform are regulated ...
Hinge switches – si-hg63 series p/n 129465 3 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 mechanical installation all mounting hardware is supplied by the user. Fasteners must be of sufficient strength to guard against breakage. Use of permanent fas...
Hinge switches – si-hg63 series p/n 129465 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 fine-adjusting the switch point setting the adjustment screw can be used to adjust the setting by ±1.5°. This can be useful to compensate for deviations during i...
Hinge switches – si-hg63 series p/n 129465 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 h. Figure 3. Relocating the switch point setting a. B. C. D. E. G. F. Sw8.
Hinge switches – si-hg63 series 6 p/n 129465 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 electrical connection as illustrated in figure 4, a normally-closed safety contact (i.E., a safety contact that is closed when the actuator is engaged) from ea...
Hinge switches – si-hg63 series p/n 129465 banner engineering corp. • minneapolis, mn u.S.A. Www.Bannerengineering.Com • tel: 763.544.3164 specifications dimensions 4.0 mm (0.16") 19.5 mm (0.77") 147.0 mm (5.79") 45.0 mm (1.77") 63.0 mm (2.48") 6.3 mm (0.25") m12x1 18 mm (0.71") 33.0 mm (1.30)" 82.0...
Banner engineering corp., 9714 tenth ave. No., minneapolis, mn usa 55441 • phone: 763.544.3164 • www.Bannerengineering.Com • email: sensors@bannerengineering.Com hinge switches – si-hg63 series p/n 129465 warranty: banner engineering corp. Warrants its products to be free from defects for one year. ...