Save these instructions heavy-duty steel wagon owner’s manual warning: read carefully and understand all assembly and operation instructions before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item # 51206.
Page 2 of 13 thank you very much for choosing a bannon product! For future reference, please complete the owner’s record below: serial number/lot date code: ________________________________ purchase date: ____________________________________________ save the receipt, warranty, and this manual. It is...
Page 3 of 13 table of contents intended use .......................................................................................................................................... 4 technical specifications .............................................................................................
Page 4 of 13 intended use perfect for moving and unloading supplies around the yard when working on gardening and landscaping projects. Technical specifications property specification capacity 800 lbs. Tires 10 inch pneumatic tires do not inflate the tires to more than 30 psi. Construction steel con...
Page 5 of 13 work area safety inspect the work area before each use. Keep work area clean, dry, free of clutter, and well lit. Cluttered, wet, or dark work areas can result in injury. Using the wagon in confined work areas may put you dangerously close to other cutting tools and rotating parts. Keep...
Page 6 of 13 specific operation warnings do not exceed the overall maximum load capacity of 800 lbs. The weight rating is based on an evenly distributed load. Do not load items on the top edges of the panels. Remove panels before loading oversized items. Use caution when removing sides as the load c...
Page 7 of 13 assembly instructions tools required step 1 assemble the front and rear axle to the bed of the wagon. Tighten bolts securely. Step 2 assemble the yoke to the front axle. Tighten bolts securely..
Page 8 of 13 step 3 place the wheels onto each axle (valve stem facing out) and secure using washer and cotter pin. Bend back the ends of the cotter pin to keep them in place. Step 4 turn the wagon upright. Attach the handle to the yoke. Tighten securely..
Page 9 of 13 step 5 attach the mesh panels to the side of the bed frame. Step 6 insert liner. Before each use read carefully and understand all assembly and operation instructions before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal i...
Page 10 of 13 operating instructions distribute the load evenly over the surface of the bed. Do not load items on the top edges of the wagon. Using the swivel handle 1. Remove clips and cotter pins. 2. Rotate the handle and insert cotter pin. Secure by attaching the clip. 3. The second cotter pin is...
Page 11 of 13 parts diagram parts list ref. Description qty. 1 front axle 1 2 yoke 1 3 rear axle 1 4 liner 1 5 front/rear panels 2 6 side panels 2 7 tires 4 8 handle 1 9 hardware kit 1 replacement parts for replacement parts and technical questions, please call customer service at 1-800-222-5381 . N...
Page 12 of 13 limited warranty northern tool and equipment company, inc. ("we'' or '"us'') warrants to the original purchaser only ("you'' or “your”) that the bannon product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of...
Page 13 of 13 distributed by northern tool and equipment company, inc. Burnsville, minnesota 55306 northerntool.Com made in china.
