Bap HC-10 Operation Manual - page 2
u
v
w
x
u
v
w
x
y
u
v w
y
x
Functions of Handheld Microphone
IWH-201XP
1.
2.
Two-color power ON/Low battery LED changes color to indicate low
batteries.
3.
Slide to turn microphone on.
4.
Transmitting the infrared ray which carrying voice.
5.
This switch changes transmitting power of infrared ray.
If transmission system may pick up some noise at Lo position. It means
the transmitting distance may be insufficient. Set the switch to Hi
position.
Factory setting is Hi position.
Grille cover
Low battery indicator
Power switch
Infrared emission source
Power selector switch (Lo/Hi)
l
l
l
l
l
l
u
Functions of Tie-Clip Microphone
IWM-202XP
1.
2.
Two-color power ON/Low battery LED
changes color to indicate low batteries.
3.
Slide to turn microphone on.
4.
Transmitting the infrared ray which carrying
voice.
5.
Input audio level control serves as remote
volume control.
Lavalier or Headworn Microphone
Low battery indicator
Power switch
Infrared emission source
Volume Control
l
l
l
l
1.
Microphone with infrared emission source
that transmits infrared ray which carrying
voice.
2.
Two-color power ON/Low battery LED
changes color to indicate low batteries.
3.
Slide to turn microphone on.
4.
Input audio level control serves as remote
volume control.
Microphone with built-in infrared emission
Low battery indicator
Power switch
Volume Control
l
l
l
l
Mounting the Infrared External Sensor
IR-20X
Functions of Neckworn Microphone
IWM-303
Example of ideal position for sensor
Covering range of infrared rays.
1. Mount the FIXING HOLDER (wall or ceiling) by using a screw or two pieces
of double coated tape.
2. Find the best position with wide view of the room. Mount the sensor along
with the FIXING HOLDER on the wall or ceiling.
Note: When power up, the LED of infrared sensor will light up to red if not
please consult with your nearest dealer.