BAPI BA/T100 Installation & Operating Instructions

Installation & Operating Instructions

Temperature Sensor Transmitters

BA/(T100, T1K, T10K) Temperature Transmitters

Building Automation Products, Inc., 750 North Royal Avenue, Gays Mills, WI  54631 USA

Tel:+1-608-735-4800 • Fax+1-608-735-4804 • E-mail:sales@bapihvac.com • Web:www.bapihvac.com

Specifications subject to change without notice.

rev. 04/18/13

22199_ins_T1K_T100_XMTR

1 of 4

The BA/T100 units are 4 to 20mA loop powered transmitters that can be ordered with separately purchased 100Ω (385) platinum 

RTD.  The BA/T1K units are 4 to 20mA loop powered transmitters that can be ordered with separately purchased 1KΩ (385) 

platinum RTD.  The BA/T10K units are 4 to 20mA loop powered or 0 to 5VDC or 0 to 10VDC transmitters that can be ordered 

with separately purchased 10K-2, 10KΩ type 2 thermistors. T100 and T1K transmitters come with flying leads but terminals are 

available (-TS). Terminals are not available on the T10K units. 

Fig 1: BA/T1x-XOR-TS 

Transmitter w/ plate mount

Fig 3: BA/T1x-XOR-TRK 

Transmitter w/ Snaptrack

Fig 5: BA/T1x-XOR-BB2

Transmitter in BAPI-Box 2 (BB2)

Fig 7: BA/T1x-XOR-(EU, EUO) 

Transmitter in Weather Tight (EU) Enclosure 

Fig 2: BA/T1x-XOR-STM-TS 

Transmitter only

Peel off 

mounting tape

Fig 4: BA/T1x-XOR-BB 

Transmitter in BAPI-Box (BB)

Fig 6: BA/T1x-XOR-WP 

Transmitter in Weatherproof (WP) Enclosure

Fig 8: BA/T1x-XOR-EUM

Transmitter only (fits inside Weather Tight (EU) Enclosure

6

6

Overview

Identification