1. DL manuals
  2. Baracoda
  3. Barcode Reader
  4. 2604
  5. User Manual

Baracoda 2604 User Manual

Manual is about: Baracoda Barcode Reader User Manual

Summary of 2604

  • Page 1

    The bluetooth name and bluetooth registered trademarks are owned by bluetooth sig, inc., and are used by baracoda under license. The baracoda names and baracoda trademarks are own by baracoda. All specifi cation are subject to change without notice - non contractual pictures © baracoda - all rights r...

  • Page 2

    2604 user guide table of contents 1 introduction.............................................................................................................................. 2 2 installing/replacing batteries .............................................................................................

  • Page 3

    2604 user guide 1introduction the 2604 is easy to use. Simply press the trigger to scan a barcode. The colour of the led indicates the status of the device. A beep indicates when the scanner connects to the remote device and when a barcode is scanned successfully. Acknowledgement of a completed scan...

  • Page 4

    2604 user guide 3proper scanning position position the scanner so the light beam fully overlaps and crosses the bar code. The scanner will emit a beep when the scan is successful. Sample bar code * 1 2 3 4 5 6 7 8 - * 4quick start up guide find below how to quickly verify that your scanner is workin...

  • Page 5

    2604 user guide 5led and beep signals summary the led color indicates the operating mode: red full memory or empty battery orange batch mode green real-time mode led blinking indicates rf status single blinks (e.G. *pause*pause*…) the scanner is ready to be connected double blinks (e.G. **pause**pau...

  • Page 6

    2604 user guide 6configuring your scanner there are two ways to configure your scanner: when connected to host device, you can use the baracodamanager for multiple settings (refer to baracodamanager documentation). Or, you can use configuration barcodes (refer to the programming guide). To reset the...

  • Page 7

    2604 user guide 6.3 symbology you can enable/disable type of barcode decoders with both the baracodamanager and the programming guide. 6.4 data format 6.4.1 acknowledgment: you are given an acknowledgment if the scan is successful. You can configure or disable the scanner acknowledgement through bar...

  • Page 8

    2604 user guide 7other functions 7.1power management you can configure your scanner to work at 20 dbm (default setting) or 10 dbm through baracodamanager. Due to local law, you may not use 20 dbm in some countries (like italy). Please refer to your local law before using your scanner. 7.2sniff perio...

  • Page 9

    2604 user guide 8safety/regulatory. Emissions: fcc class a en60950 & en60825-1 vcc1-b electronical: ul, tuv changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. (in accordance with fcc part 15.21). Specific ...