- DL manuals
- Baracoda
- Headphone
- Bluetooth Headset
- User Manual
Baracoda Bluetooth Headset User Manual - page 8
BaracodaManager for PC – User Guide v3.39
- 8 -
Data Capture
for Workforce
in Motion
When the BaracodaManager is running its icon appears on the task bar:
If no barcode reader(s) are connected to the BaracodaManager, the inside color of the icon is white (as in the
picture above).
The BaracodaManager automatically attempts to connect the barcode reader(s) which you have already
configured. Its icon turns green as soon as it connects to at least one barcode reader:
The main window of the BaracodaManager is shown on the screenshot below:
The “My Paired Devices” section of the window shows the configured barcode reader(s) and their connection
status (Connected/Disconnected/Connecting).
Summary of Bluetooth Headset
Page 1
Data capture for workforce in motion baracodamanager for pc user guide ©baracoda tm – april 2011.
Page 2: Summary
Baracodamanager for pc – user guide v3.39 - 2 - data capture for workforce in motion summary summary ................................................................... 2 revision history .......................................................... 5 introduction .........................................
Page 3
Baracodamanager for pc – user guide v3.39 - 3 - data capture for workforce in motion 9.1. B atch mode settings .................................................. 31 9.2. P roduct settings .................................................... 32 9.3. B luetooth settings ..................................
Page 4
Baracodamanager for pc – user guide v3.39 - 4 - data capture for workforce in motion 17. Uploading data stored in batch mode ................................ 67 18. Firmware upgrade ................................................... 68 19. Plugins ......................................................
Page 5: Revision History
Baracodamanager for pc – user guide v3.39 - 5 - data capture for workforce in motion revision history changes to the original manual are listed below. Document date description 3.34 13 th june 08 initial release 3.34.1 18 th august 08 tagrunners added, new master mode added 3.35 16 th october 08 tag...
Page 6: Introduction
Baracodamanager for pc – user guide v3.39 - 6 - data capture for workforce in motion introduction the baracodamanager for pc software allows the user to easily operate their barcode reader(s), including: connecting automatically to the barcode reader(s) that the user wants to use inserting the scann...
Page 7: Overview
Baracodamanager for pc – user guide v3.39 - 7 - data capture for workforce in motion 1. Overview to set up the baracodamanager and to configure it with their barcode reader(s), the user should check the following sections: - installation - getting started this section shows the user how to use the b...
Page 8
Baracodamanager for pc – user guide v3.39 - 8 - data capture for workforce in motion when the baracodamanager is running its icon appears on the task bar: if no barcode reader(s) are connected to the baracodamanager, the inside color of the icon is white (as in the picture above). The baracodamanage...
Page 9
Baracodamanager for pc – user guide v3.39 - 9 - data capture for workforce in motion the table below shows the main functions available in the baracodamanager main window (for details, see the functions section): button corresponding action search all devices find all discoverable barcode readers (w...
Page 10: Installation
Baracodamanager for pc – user guide v3.39 - 10 - data capture for workforce in motion 2. Installation to use baracoda barcode reader(s), the client needs to complete the following tasks in sequence: - install the bluetooth stack software (if not installed yet) - install the baracodamanager - configu...
Page 11: Getting Started
Baracodamanager for pc – user guide v3.39 - 11 - data capture for workforce in motion 3. Getting started this section shows the user how to configure the baracodamanager to connect and use their barcode reader(s). Since the baracodamanager version 3.38, two ways of connecting a reader are possible: ...
Page 12
Baracodamanager for pc – user guide v3.39 - 12 - data capture for workforce in motion 3. Select a barcode reader (in the “devices in range” list) by clicking on it, then click on the “add selected” button. A bluetooth message appears near the system tray: 4. Click on the bluetooth icon in the system...
Page 13
Baracodamanager for pc – user guide v3.39 - 13 - data capture for workforce in motion 6. The baracodamanager is now configured with the user’s barcode reader. The “my paired devices” section of the baracodamanager window displays: - the autoconnect box is checked. The baracodamanager will try to aut...
Page 14
Baracodamanager for pc – user guide v3.39 - 14 - data capture for workforce in motion - the baracodamanager searches for all discoverable barcode reader(s) not previously configured (which are in the bluetooth radio range and are in listening mode). This is true when there are no configured readers ...
Page 15
Baracodamanager for pc – user guide v3.39 - 15 - data capture for workforce in motion 7. The baracodamanager is now configured with the user’s barcode reader. The “my paired devices” section of the baracodamanager window displays: - the autoconnect box is checked. The baracodamanager will try to aut...
Page 16
Baracodamanager for pc – user guide v3.39 - 16 - data capture for workforce in motion notes: if the user switches off a barcode reader (with the reset switch or through time-out) and they switch it on again, the baracodamanager reconnects to the barcode reader. In the situation where the “real time”...
Page 17: Functions
Baracodamanager for pc – user guide v3.39 - 17 - data capture for workforce in motion 4. Functions 4.1. Adding/removing a barcode reader the first time the user runs the baracodamanager, it searches for all bluetooth barcode readers which are discoverable (in listening mode and within bluetooth radi...
Page 18: Baracoda Pencil Settings
Baracodamanager for pc – user guide v3.39 - 18 - data capture for workforce in motion 5. Baracoda pencil settings the settings window displays eight buttons and four groups: - general information - current operating mode information - shutdown timer information - other settings the following two tab...
Page 19
Baracodamanager for pc – user guide v3.39 - 19 - data capture for workforce in motion the following table shows the other settings buttons that you can set: button functionality product access product settings (see below) bluetooth access bluetooth connection settings (see below) symbology access ty...
Page 20
Baracodamanager for pc – user guide v3.39 - 20 - data capture for workforce in motion 5.3. Symbology settings 5.4. Batch mode settings the batch mode configuration displays three buttons and give the choice between: 1. Upload barcodes to a file o always upload to the same file, overwriting the previ...
Page 21: Baracodapencil2 Settings
Baracodamanager for pc – user guide v3.39 - 21 - data capture for workforce in motion 6. Baracodapencil2 settings the settings window displays eight buttons and five groups: - general information - current operating mode information - shutdown timer information - battery - other settings the followi...
Page 22
Baracodamanager for pc – user guide v3.39 - 22 - data capture for workforce in motion the following table shows the other settings buttons that you can set: button functionality product access product settings (see below) bluetooth access bluetooth connection settings (see below) symbology access ty...
Page 23
Baracodamanager for pc – user guide v3.39 - 23 - data capture for workforce in motion 6.2. Product settings to find out more about the product settings, please refer to the barcode reader user manual. 6.3. Bluetooth settings to find out more about the bluetooth settings, please refer to the barcode ...
Page 24
Baracodamanager for pc – user guide v3.39 - 24 - data capture for workforce in motion 6.4. Symbology settings to find out more about the symbology settings, please refer to the barcode reader user manual. Check the box to enable aim id prefix specific to symbology select type of barcode to configure...
Page 25: Bl1000 Settings
Baracodamanager for pc – user guide v3.39 - 25 - data capture for workforce in motion 7. Bl1000 settings the settings window displays three buttons and two groups: - general information - shutdown timers the following two tables show the general information fields: field functionality radio version ...
Page 26: D-Fly Settings
Baracodamanager for pc – user guide v3.39 - 26 - data capture for workforce in motion 8. D-fly settings the settings window displays eight buttons and five groups: - general information - current operating mode information - shutdown timer information - battery - other settings the following two tab...
Page 27
Baracodamanager for pc – user guide v3.39 - 27 - data capture for workforce in motion the following table shows the other settings buttons that you can set: button functionality product access product settings (see below) bluetooth access bluetooth connection settings (see below) symbology access ty...
Page 28
Baracodamanager for pc – user guide v3.39 - 28 - data capture for workforce in motion 8.2. Product settings to find out more about the product settings, please refer to the barcode reader user manual. 8.3. Bluetooth settings to find out more about the bluetooth settings, please refer to the barcode ...
Page 29
Baracodamanager for pc – user guide v3.39 - 29 - data capture for workforce in motion 8.4. Symbology settings to find out more about the symbology settings, please refer to the barcode reader user manual. Check the box to enable aim id prefix specific to symbology select the max. Length of decoded b...
Page 30
Baracodamanager for pc – user guide v3.39 - 30 - data capture for workforce in motion 9. Baracoda roadrunners settings the settings window displays eight buttons and five groups: - general information - current operating mode information - shutdown timer information - battery - other settings the fo...
Page 31
Baracodamanager for pc – user guide v3.39 - 31 - data capture for workforce in motion the following table shows the other settings buttons that you can set: button functionality product access product settings (see below) bluetooth access bluetooth connection settings (see below) symbology access ty...
Page 32
Baracodamanager for pc – user guide v3.39 - 32 - data capture for workforce in motion 9.2. Product settings to find out more about the product settings, please refer to the barcode reader user manual. 9.3. Bluetooth settings to find out more about the bluetooth settings, please refer to the barcode ...
Page 33
Baracodamanager for pc – user guide v3.39 - 33 - data capture for workforce in motion 9.4. Symbology settings to find out more about the symbology settings, please refer to the barcode reader user manual. Check the box to enable aim id prefix specific to symbology select the max. Length of decoded b...
Page 34
Baracodamanager for pc – user guide v3.39 - 34 - data capture for workforce in motion 10. Baracoda roadrunners evolution settings the settings window displays eight buttons and five groups: - general information - current operating mode information - shutdown timer information - battery - other sett...
Page 35
Baracodamanager for pc – user guide v3.39 - 35 - data capture for workforce in motion the following table shows the other settings buttons that you can set: button functionality product access product settings (see below) bluetooth access bluetooth connection settings (see below) symbology access ty...
Page 36
Baracodamanager for pc – user guide v3.39 - 36 - data capture for workforce in motion 10.1. Batch mode settings the batch mode configuration displays three groups of controls: - the “upload barcodes/rfid tag ids” group that lets the user specify whether the uploaded barcodes will be saved in a file ...
Page 37
Baracodamanager for pc – user guide v3.39 - 37 - data capture for workforce in motion 10.2. Product settings to find out more about the product settings, please refer to the barcode reader user manual. 10.3. Bluetooth settings to find out more about the bluetooth settings, please refer to the barcod...
Page 38
Baracodamanager for pc – user guide v3.39 - 38 - data capture for workforce in motion 10.4. Symbology settings to find out more about the symbology settings, please refer to the barcode reader user manual. Select type of barcode to configure. Select the max. Length of decoded barcodes reset all symb...
Page 39
Baracodamanager for pc – user guide v3.39 - 39 - data capture for workforce in motion 10.5. Signature/image configuration settings this configuration window allows the user to set up the signature and picture mode options. Please note that the signature and image modes are only available for roadrun...
Page 40
Baracodamanager for pc – user guide v3.39 - 40 - data capture for workforce in motion please note that the above filename settings apply to real time mode only (with the exception of the “add reader bluetooth address to filename” option which also applies to batch mode). To set the batch mode option...
Page 41: Baracoda Tagrunners Settings
Baracodamanager for pc – user guide v3.39 - 41 - data capture for workforce in motion 11. Baracoda tagrunners settings the settings window displays eight buttons and five groups: - general information - current operating mode information - shutdown timer information - battery - other settings the fo...
Page 42
Baracodamanager for pc – user guide v3.39 - 42 - data capture for workforce in motion button functionality product access product settings (see below) bluetooth access bluetooth connection settings (see below) rfid settings access types of rfid tags settings (see below) the table below shows the act...
Page 43
Baracodamanager for pc – user guide v3.39 - 43 - data capture for workforce in motion 11.2. Product settings to find out more about the product settings, please refer to the barcode reader user manual. 11.3. Bluetooth settings to find out more about the bluetooth settings, please refer to the barcod...
Page 44
Baracodamanager for pc – user guide v3.39 - 44 - data capture for workforce in motion 11.4. Rfid settings the rfid settings window has three different tab controls. The first one, named “general”, allows the user to activate/deactivate the protocol id transmission. When this option is active, every ...
Page 45
Baracodamanager for pc – user guide v3.39 - 45 - data capture for workforce in motion the second tab window of the rfid settings manages the nxp mifare keys that are stored in the tagrunners memory: the other tab windows, named “rfid protocols”, can be used to enable/disable the type of rfid tags th...
Page 46
Baracodamanager for pc – user guide v3.39 - 46 - data capture for workforce in motion 12. Baracoda dualrunners settings the settings window displays nine buttons and six groups: - general information - current operating mode information - shutdown timer information - battery - data capture mode - ot...
Page 47
Baracodamanager for pc – user guide v3.39 - 47 - data capture for workforce in motion the following table shows the shutdown timer fields that you can set: field functionality when connected set the delay (in minutes) after which the barcode reader switches off, when the barcode reader is connected ...
Page 48
Baracodamanager for pc – user guide v3.39 - 48 - data capture for workforce in motion 12.1. Batch mode settings the batch mode configuration displays three groups of controls: - the “upload barcodes/rfid tag ids” group that lets the user specify whether the uploaded data will be saved in a file or s...
Page 49
Baracodamanager for pc – user guide v3.39 - 49 - data capture for workforce in motion 12.2. Product settings to find out more about the product settings, please refer to the barcode reader user manual. 12.3. Bluetooth settings to find out more about the bluetooth settings, please refer to the barcod...
Page 50
Baracodamanager for pc – user guide v3.39 - 50 - data capture for workforce in motion 12.4. Symbology settings to find out more about the symbology settings, please refer to the barcode reader user manual. Select type of barcode to configure. Select the max. Length of decoded barcodes reset all symb...
Page 51
Baracodamanager for pc – user guide v3.39 - 51 - data capture for workforce in motion 12.5. Rfid settings the rfid settings window has three different tab controls. The first one, named “general”, allows the user to activate/deactivate the protocol id transmission. When this option is active, every ...
Page 52
Baracodamanager for pc – user guide v3.39 - 52 - data capture for workforce in motion the second tab window of the rfid settings manages the nxp mifare keys that are stored in the dualrunners memory: the other tab windows, named “rfid protocols”, can be used to enable/disable the type of rfid tags t...
Page 53
Baracodamanager for pc – user guide v3.39 - 53 - data capture for workforce in motion 12.6. Signature/image configuration settings this configuration window allows the user to set up the signature and picture mode options. Please note that the signature and image modes are only available for dualrun...
Page 54
Baracodamanager for pc – user guide v3.39 - 54 - data capture for workforce in motion please note that the above filename settings apply to real time mode only (with the exception of the “add reader bluetooth address to filename” option which also applies to batch mode). To set the batch mode option...
Page 55: Blr2604)
Baracodamanager for pc – user guide v3.39 - 55 - data capture for workforce in motion 13. 2604 series settings (for bc2604, bl2604, blr2604) the settings window displays eight buttons and four groups: - general information - current operating mode information - shutdown timer information - other set...
Page 56
Baracodamanager for pc – user guide v3.39 - 56 - data capture for workforce in motion the following table shows the other settings buttons that you can set: button functionality product access product settings (see below) bluetooth access bluetooth connection settings (see below) symbology access ty...
Page 57
Baracodamanager for pc – user guide v3.39 - 57 - data capture for workforce in motion 13.2. Product settings to find out more about the product settings, please refer to the barcode reader user manual. 13.3. Bluetooth settings to find out more about the bluetooth settings, please refer to the barcod...
Page 58
Baracodamanager for pc – user guide v3.39 - 58 - data capture for workforce in motion 13.4. Symbology settings to find out more about the symbology settings, please refer to the barcode reader user manual. 13.5. Advanced settings these settings are useful only to developers writing their own plugin ...
Page 59: Bcm2604 Settings
Baracodamanager for pc – user guide v3.39 - 59 - data capture for workforce in motion 14. Bcm2604 settings the settings window displays five buttons and four groups: - general information - current operating mode information - shutdown timer information - other settings the following two tables show...
Page 60
Baracodamanager for pc – user guide v3.39 - 60 - data capture for workforce in motion the table below shows the actions you can take with the buttons: button functionality cancel close window with no changes. Save store and send the new parameters to the barcode reader. Default settings restore the ...
Page 61
Baracodamanager for pc – user guide v3.39 - 61 - data capture for workforce in motion 15. Baracoda toughrunners and scanwear settings the settings window displays eight buttons and five groups: - general information - current operating mode information - shutdown timer information - battery - other ...
Page 62
Baracodamanager for pc – user guide v3.39 - 62 - data capture for workforce in motion the following table shows the other settings buttons that you can set: button functionality product access product settings (see below) bluetooth access bluetooth connection settings (see below) symbology access ty...
Page 63
Baracodamanager for pc – user guide v3.39 - 63 - data capture for workforce in motion 15.2. Bluetooth settings to find out more about the bluetooth settings, please refer to the barcode reader user manual. 15.3. Symbology settings to find out more about the symbology settings, please refer to the ba...
Page 64: Idblue Settings
Baracodamanager for pc – user guide v3.39 - 64 - data capture for workforce in motion 16. Idblue settings the settings window displays eight buttons and five groups: - general information - disconnected mode information - shutdown timer information - rf protocol - battery - other settings the follow...
Page 65
Baracodamanager for pc – user guide v3.39 - 65 - data capture for workforce in motion the following table shows the battery field: field functionality battery battery level (ok or recharge battery). The following table shows the other settings buttons that you can set: button functionality bluetooth...
Page 66
Baracodamanager for pc – user guide v3.39 - 66 - data capture for workforce in motion 16.2. Bluetooth settings to find out more about the bluetooth settings, please refer to the barcode reader user manual. Check the box to activate pin code authentication select the duration of sniff period reader’s...
Page 67
Baracodamanager for pc – user guide v3.39 - 67 - data capture for workforce in motion 17. Uploading data stored in batch mode this feature is supported by all readers with the exception of the bl1000, bcm2604 and some d-fly (with firmware v1.54 and newer) reader models. Select a connected reader in ...
Page 68: Firmware Upgrade
Baracodamanager for pc – user guide v3.39 - 68 - data capture for workforce in motion 18. Firmware upgrade this function is supported by all baracoda readers with the exception of the the 2604 series and the bcm 2604. In order to upgrade their reader, the user should select a connected barcode reade...
Page 69
Baracodamanager for pc – user guide v3.39 - 69 - data capture for workforce in motion when the upgrade file has been specified, the baracodamanager activates a modeless topmost window showing the progress of the upgrade operation: the user should not try to close this window or click any baracodaman...
Page 70: Plugins
Baracodamanager for pc – user guide v3.39 - 70 - data capture for workforce in motion 19. Plugins 19.1. Terminal plugin the terminal function allows the user to display scanned barcode(s) when the reader is connected in real time mode..
Page 71
Baracodamanager for pc – user guide v3.39 - 71 - data capture for workforce in motion 19.2. Kemul plugin the kemul function is to emulate keyboard strokes corresponding to scanned barcodes. With kemul the user can send the barcode scanned by the barcode reader to the selected field of their applicat...
Page 72
Baracodamanager for pc – user guide v3.39 - 72 - data capture for workforce in motion 19.3. Idblue plugin this plugin can be used to read and write rfid tag data. The kemul or terminal plugins receive only the tag id from the idblue reader. The read and write buttons allow the user to read and write...
Page 73
Baracodamanager for pc – user guide v3.39 - 73 - data capture for workforce in motion 19.4. Btr_bsw plugin this plugin shows that the baracoda toughrunners/scanwear readers can scan barcodes when sent a special command (described in their protocol guide). When the user clicks the “scan a barcode” bu...
Page 74
Baracodamanager for pc – user guide v3.39 - 74 - data capture for workforce in motion 19.5. Rfid plugin this plugin can be used to read and write the contents of an rfid tag with a tagrunners or dualrunners reader. The user should select the tag type in the combo box at the top of the window or leav...
Page 75
Baracodamanager for pc – user guide v3.39 - 75 - data capture for workforce in motion 19.6. Pictureplugin the pictureplugin can be used to capture signatures or take pictures with the roadrunners evolution 2d or dualrunners 2d readers having a firmware version 1.47 or newer. Please note that before ...