BARBAROS BERU 24100 B Service Manual - page 6
Commutator
It provides the operation of the components inside
the oven, like hotplates, heating elements,
oven lamp, fan motor, and rotisserie
motor, at the desired positions in
electrical, turbo and multi-functional
ranges. It is connected to the control knobs and
operates with the action of them. Different types of
commutators exist at various settigs. On electrical and
turbo ranges, an electrical thermostat is connected to
the rear of the commutator, whereas in multifunctional
ranges the commutator operates alone
Hot Plate
It is the top electrical heater. It is controlled with a 4
or 7 positioned commutator that can be
set to different temperatures.
The 0 setting is the OFF position, while
tho other temperature settings vary between
4 and 6. The diameter and the power of the plate
depends on the type of the range.
Ceran Hot Plate
It exists in the Ceran type ovens, installed under the
Ceran Glass, and heats the glass
region within the projection area
from the bottom. It is controled with an
energy regulator and/or a 7-positioned commutator
mounted to the control knob, that can be adjusted to
different temperatures. The 0 setting is OFF while the
other temperature settings vary between 1 and 6.
Analog timer
It is used for the purpose of programming by setting
the time while cooking or else to
show the time on the oven. It performs
various functions such as adjusting
the daily actual time, adjusting the alarm (bell)
timing, adjusting the cooking time, adjusting of the
cooking starting time, cooking with timer by automatic
programming, semi-automatic programming (rapid
cooking with certain time), etc. The alarm of the timer
may be set up to 55-60 minutes while the analog
timer itself may be set between 0-180 minutes.
Digital timer
It is used for the purpose of programming by setting
the time while cooking or else to show the
time on the oven. The electric current going
to the heating elements passes through the timer. In
order to activate the heating elements, the timer needs
definitely to be set. Together with the heating elements
inside the oven, the hot plate can also be programmed
with the digital timer. The digital timer performs various
functions such as manual cooking (rapid cooking),
semi-automatic programming, automatic programming,
programming for a warning in a short time, etc. If the
oven digital timer has been programmed, the heating
elements are not activated until the program starts.
The cooking time can be adjusted between 0 - 24
hours as well as the sound alarm.
It is used to abstruct the grill and oven working
together when door is closed.