1. DL manuals
  2. barbas
  3. Indoor Fireplace
  4. Unilux-3 40
  5. Installation Instructions Manual

Barbas Unilux-3 40 Installation Instructions Manual

Summary of Unilux-3 40

  • Page 1

    Directions for use installation instructions unilux-3 40 / 52 / 55 / 65 name output description unilux-3 40 5.0 kw fireplace insert unilux-3 52 7.0 kw fireplace insert unilux-3 55 8.0 kw fireplace insert unilux-3 65 7.0 kw fireplace insert serial number: production date: en -13229 version : 04 - 326...

  • Page 2

    2 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions.

  • Page 3

    3 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions unilux-3 40 (3 sided frame) unilux-3 52 (without frame) unilux-3 55 (without frame) unilux-3 65 (4 sided frame).

  • Page 4

    4 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions.

  • Page 5: Table of Contents

    5 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions table of contents page 1 introduction 1.1 preface............................................................................ 7 1.2 safety.............................................................................. 8 2 l...

  • Page 6

    6 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions.

  • Page 7

    7 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions 1 introduction 1.1 preface we would like to congratulate you on your purchase of this modern barbas fi replace insert. This quality product will give you years of heating pleasure as you enjoy the play of the fl ames and t...

  • Page 8

    8 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions 1.2 safety and installation instructions safety • do not place fl ammable objects within 100 cm of the appliance. Pay special attention to furnishings and ornaments around the fi re. • when you use your fi replace insert, ...

  • Page 9

    9 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions installation instructions • wood and wood briquettes may be stoked in the stove. Coals can’t be burned in the fi re. • never use the heater to burn rubbish. • please read all instructions / stickers on and around the appli...

  • Page 10

    10 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions 2.2 preparation for positioning check all functions of the fi replace before fi tting. • check the opening and closing operation of the door. Documentation warranty manual attributes glove (heat resistant up to max. 95°c)...

  • Page 11

    11 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions • check the operation and setting of the fl ue gas fl ap. Flue gas fl ap pin flue gas fl ap door open pin comes forwards flue gas fl ap open door closed pin is pressed in by the door flue gas fl ap closed handle ± 50° for...

  • Page 12

    12 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions • check whether the ashtray is completely empty. • check the operation of the slider for controlling the combustion air..

  • Page 13

    13 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions • report any defects immediately to your dealer. • remove enclosed documents and components from the fi re. Have the suitability of the area in which the fi re is to be fi tted (and the chimney) approved by a specialist. ...

  • Page 14

    14 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions 3 installation instructions 3.1 fitting the fireplace when fi tting one of these fi replace inserts local and/or national regulations relating to fi re safety must be followed. In case of doubt, consult the fi re safety d...

  • Page 15

    15 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions 3.3 fitting without frame (integrated frame side strip and top strip) 3 sided frame 4 sided frame.

  • Page 16

    16 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions a fi replace insert can be fi tted in the newly-built or existing chimney breast of an open fi re. When fi tting, both fi re safety and operational safety must be safeguarded. The fi tter is responsible for this. General ...

  • Page 17

    17 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions in dwellings with an operating extractor hood, this should be turned to the lowest setting or turned off altogether. If the extractor hood remains in use, additional ventilation must be provided in compensation. This will...

  • Page 18

    18 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions 3.3.3 fitting in a newly-built chimney breast • if required, a convection set can be added when installing the appliance. (not applicable for unilux-3 40.) • use convection set: the function of the convection set (option)...

  • Page 19

    19 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions ° now connect the fl exible hoses to the 2 collar adaptors (Ø125 mm) on the top of the fi re and to the metal fi tting box on the air exit grids that are being used (do not forget to fi t hose clamps). ° ensure that the f...

  • Page 20

    20 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions figure 1: use of ventilation of the fi replace unilux-3 40 • close up the front. Unilux-3 40: the appliance has its own intake and discharge openings for the convection air. Unilux-3: the appliance has its own intake and ...

  • Page 21

    21 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions available barbas grids (option) for ventilating the fi replace: colour dimension (cm) clear opening (cm 2 ) brass or white 13.5 x 13.5 75 (incl. Fi tting) brass or white 27.0 x 13.5 150 (incl. Fi tting) perma air (white) ...

  • Page 22

    22 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions • disassembling the smoke outlet top-connection. • pull the stovepipe or the stainless steel (fl exible) pipe downwards through the appliance and secure it to the smoke outlet connection. Stainless steel fl exible.

  • Page 23

    23 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions • push the smoke outlet connection back upwards and secure it in place. • replace the brake plate, the complete interior and fl ue gas fl ap. Stovepipe of steel fix with hose clamp (minimum 2 pieces per connection.).

  • Page 24

    24 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions 4 operation of the fireplace insert 1 handle 2 ceramic heat-proof glass 3 locking slider for operating pin of fl ue gas fl ap 4 operating pin of fl ue gas fl ap 5 smoke outlet (can be dismounted) 6 convection air escape o...

  • Page 25

    25 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions figure 4: operation unilux-3 52 / 55 / 65 1 handle 2 ceramic heat-proof glass 3 locking slider for operating pin of fl ue gas fl ap 4 operating pin of fl ue gas fl ap 5 convection air escape opening (2x). Optional use for...

  • Page 26

    26 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions 5 stoking up for the first time if you have had your chimney breast modifi ed or newly built, fi rst allow your home to dry properly. Walls which have not been allowed to dry properly are a magnet for dust such as any smo...

  • Page 27

    27 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions open close 6 use 6.1 ventilation air is a vital component of the combustion process. Ensure that there is a suffi cient supply of fresh air. For each kilo of wood that you put on the fi re (door closed), 10 - 15 m 3 of ex...

  • Page 28

    28 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions when setting the fi re, move the locking slider all the way to the left. If necessary, leave the door ajar for 10 minutes. Do not open the door wide, as the window will remain cold. If the door is shut during this time, s...

  • Page 29

    29 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions we recommend that you maintain a substantial layer of ash (2 - 3 cm). This not only forms a protective layer for the base of the appliance but also signifi cantly reduces consumption of fuel and allows new wood to catch l...

  • Page 30

    30 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions continuous stoking with the primary air supply open (combustion air supply slider is right over to the “ + ” position) (air through the grate) causes a fi ercely white-hot fi re that can damage the grate and other parts o...

  • Page 31

    31 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions 7 general hints 7.1 tips • burn dry wood only. Damp wood not only burns poorly, it causes more pollution in the appliance (window), the chimney, your room (when opening the door of the appliance, for instance) and the env...

  • Page 32

    32 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions • chimney fi re. If, despite all the precautions, a fi re should occur in the chimney (you generally notice that because of a roaring sound in the chimney), do the following: • immediately shut the chimney fl ap (if fi tt...

  • Page 33

    33 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions • excessive chimney draught. The combustion air does not reach the fuel, but leaves the appliance via the chimney. The fi re cools and the combustion quality decreases. • using too much wood. This is a problem if your fi ...

  • Page 34

    34 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions 8 fuels the appliance has been recommended as suitable for use in smoke control areas when burning the suitable fuels mentioned hereunder. 8.1 wood suitable fuels are: • all sorts of clean wood (forested). The wood must h...

  • Page 35

    Unilux-3 40 / 52 / 55 / 65 35 directions for use and installation instructions 9 amount of fuel 9.1 amount of fuel the fi re is constructed for a certain maximum amount of fuel. Remember that the more fuel you put into your fi re, the hotter it will become and overheating may even occur. If this hap...

  • Page 36

    36 unilux-3 40 / 52 / 55 / 65 ê per fi lling: (= for 45 minutes) wood: 2 blocks, each around 0.75 kg briquettes: 3 briquettes, each around 0.35 kg dimensions wood block: c. 15 cm long and 35 cm perimeter (≈ 0.75 kg). The maximum burning load is based on a nominal capacity of 7 kw and a effi ciency of ...

  • Page 37

    37 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions 9.2 heat radiation the table below shows the temperatures which can theoretically be achieved by burning wood. Heat radiation sort of fuel kwh/kg dry wood (average) 4.3 the heating value of wood (18.7 mj/kg at 0% humidity...

  • Page 38

    38 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions 10 regular maintenance • emptying the ashtray : weekly, 48 hours after last heating • cleaning the glass : as required • door and ashtray seals : check annually before heating is resumed. Replace as necessary • sweep and ...

  • Page 39

    39 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions when ordering, please give the serial number. 11 replacement parts 11.1 unilux-3 without frame item no description unilux-3 40 unilux-3 52 unilux-3 55 unilux-3 65 1 body 1 1 1 1 2 smoke connection 1 1 1 1 3 integrated fra...

  • Page 40

    40 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions 11.2 unilux-3 3 sided frame when ordering, please give the serial number. Item no description unilux-3 40 unilux-3 52 unilux-3 55 unilux-3 65 1 body 1 1 1 1 2 smoke connection 1 1 1 1 3 3 sided frame 1 1 1 1 4 internal pa...

  • Page 41

    41 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions 11.3 unilux-3 4 sided frame when ordering, please give the serial number. Item no description unilux-3 40 unilux-3 52 unilux-3 55 unilux-3 65 1 body 1 1 1 1 2 smoke connection 1 1 1 1 3 4 sided frame 1 1 1 1 4 internal pa...

  • Page 42

    42 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions sequence for replacing the interior of the appliance: - remove the grate and ashtray. - remove the wood rack. - remove the bottomplate in the front. - remove the fl ue gas fl ap by lifting it slightly, tipping it backward...

  • Page 43

    43 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions - remove the brake plate holder (metal strip, front of brake plate). - remove the right-hand side panel. To do this, lift the brake plate slightly. - temporarily place the brake plate one notch higher in the appliance. - ...

  • Page 44

    44 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions - remove the left-hand side panel. The entire interior is now disassembled. The interior is reassembled in the reverse order. - remove the rear panel..

  • Page 45

    45 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions 12 dimensions 12.1 unilux-3 (without frame) (with built-in frame) * unilux-3 40 has no convection connections ** unilux-3 65 has a slant back (493 mm) appliance a b c d e f g h unilux-3 40 400 * 117 * 268 395.5 350 550 un...

  • Page 46

    46 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions 12.2 unilux-3 (3 sided frame) appliance a b c d e f g h i j unilux-3 40 400 * 117 * 268 395.5 332.5 550 484 592 unilux-3 52 520 350 114 85 388 340.5 332.5 495 604 537 unilux-3 55 540 350 114 85 408 505.5 332.5 660 624 702...

  • Page 47

    47 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions 12.3 unilux-3 (4 sided frame) * unilux-3 40 has no convection connections ** unilux-3 65 has a slant back (493 mm) appliance a b c d e f g h i j unilux-3 40 400 * 117 * 268 395.5 332.5 550 484 634 unilux-3 52 520 350 114 ...

  • Page 48

    48 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions 13 technical data unilux-3 40 unilux-3 52 combustion: measured in compliance with en 13229 : 2001 and en 13229 - a2 : 2004 fuel wood wood output; min. - max. 2 - 7 kw 3 - 9 kw nominal output 5 kw 7 kw effi ciency 78% 78% p...

  • Page 49

    49 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions unilux-3 55 unilux-3 65 combustion: measured in compliance with en 13229 : 2001 and en 13229 - a2 : 2004 fuel wood wood output; min. - max. 5 - 11 kw 3 - 9 kw nominal output 8 kw 7 kw effi ciency 76% 76% pm10 dust emission...

  • Page 50

    50 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions 14 frequently asked questions how often should i have my chimney swept? At least once a year. If you use your fi re more than three times a week on average, have your chimney swept more often. Have the chimney swept by a r...

  • Page 51

    51 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions how do i know if i’m heating correctly? Follow the instructions in this manual. The fl ames should play softly across the wood and the wood should burn evenly. Once the fi re has been burning for a short time, the smoke f...

  • Page 52

    52 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions there may be too much of a draught in your chimney, particularly if it is very high (in excess of 8 m). Ask your supplier to fi t a check valve or damper. This may not be possible in all cases. Can i leave my fi re unatten...

  • Page 53

    53 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions what happens when wood is burnt? The combustion process. The combustion of wood involves the following steps. Drying the fi rst step is that the fuel (wood) dries out. Even at low temperatures (~ 100°c), any moisture still...

  • Page 54

    54 unilux-3 40 / 52 / 55 / 65 directions for use and installation instructions.

  • Page 56

    04 - 010713 - 326587.