1. DL manuals
  2. barbas
  3. Indoor Fireplace
  4. UNILUX-3200 L
  5. Installation Instructions Manual

Barbas UNILUX-3200 L Installation Instructions Manual

Summary of UNILUX-3200 L

  • Page 1

    Directions for use installation instructions unilux-3 200 l / 200 r / 300 en -13229 name output description unilux-3 200 l 8.0 kw fireplace insert unilux-3 200 r 8.0 kw fireplace insert unilux-3 300 8.0 kw fireplace insert.

  • Page 3

    3 unilux-3 200 l / 200 r / 300 unilux-3 200 r.

  • Page 4

    4 unilux-3 200 l / 200 r / 300

  • Page 5: Table of Contents

    5 unilux-3 200 l / 200 r / 300 table of contents page 1. Introduction 1.1 preface............................................................................ 7 1.2 safety.............................................................................. 7 2. Location.........................................

  • Page 6

    6 unilux-3 200 l / 200 r / 300

  • Page 7

    7 unilux-3 200 l / 200 r / 300 1. Introduction 1.1. Preface we would like to congratulate you on your purchase of this modern barbas fi replace insert. This quality product will give you years of heating pleasure as you enjoy the play of the fl ames and the cosy glow of the fi re. This manual contai...

  • Page 8

    8 unilux-3 200 l / 200 r / 300 • do not use your stove as a barbecue. This can cause (fl ammable) fat deposits to be left in the chimney and hastens the chimney becoming clogged. Prevent your chimney being soiled from above (birds’ nests etc.) by fi tting a suitable cap to the chimney pot. • follow ...

  • Page 9

    9 unilux-3 200 l / 200 r / 300 2.2. Preparation for positioning check all functions of the fi replace before fi tting. • check the opening and closing operation of the door. N.B. If any part is missing, please contact your dealer. Documentation warranty manual attributes glove (heat resistant up to ...

  • Page 10

    10 unilux-3 200 l / 200 r / 300 handle ± 50° forwards: the door releases from its lock and be opened forwards..

  • Page 11

    11 unilux-3 200 l / 200 r / 300 • check whether the ashtray is completely empty. • check the operation of the slider for controlling the combustion air..

  • Page 12

    12 unilux-3 200 l / 200 r / 300 2.3. Accessories the following accessories can be supplied by your dealer: • report any defects immediately to your dealer. • remove enclosed documents and components from the fi re. Have the suitability of the area in which the fi re is to be fi tted (and the chimney...

  • Page 13

    13 unilux-3 200 l / 200 r / 300 3. Installation instructions 3.1. Fitting the fireplace when fi tting one of these fi replace inserts local and/or national regulations relating to fi re safety must be followed. In case of doubt, consult the fi re safety department of the local fi re brigade, particu...

  • Page 14

    14 unilux-3 200 l / 200 r / 300 3.3. Fitting a fi replace insert can be fi tted in the newly-built or existing chimney breast of an open fi re. When fi tting, both fi re safety and operational safety must be safeguarded. The fi tter is responsible for this. General guidelines: • if there is a wooden...

  • Page 15

    15 unilux-3 200 l / 200 r / 300 3.3.1. Aeration / ventilation a fi replace insert generates : - heating air - combustion air heating air (convection air) is devoted to the convection of heat from the appliance to the room. No other provisions are necessary. The source of heat is in the room and stay...

  • Page 16

    16 unilux-3 200 l / 200 r / 300 3.3.2. Fitting in an existing chimney breast • remove the existing fi re basket or stoking stones and remove the shut-off fl ap. The chimney must be intact and must not be damaged during fi tting. The chimney breast opening must be big enough for a gap of 1 - 3 cm to ...

  • Page 17

    17 unilux-3 200 l / 200 r / 300 3.3.3. Fitting in a newly-built chimney breast • clad the appliance on the top, sides and rear up to the front edge with an approx. 10 cm thick ceramic insulation wool fi reblanket. Leave a few centimetres clearance between the front of the chimney breast and the appl...

  • Page 18

    18 unilux-3 200 l / 200 r / 300 figure 1: use of ventilation of the fi replace unilux-3 200 l / 200 r / 300 • close up the front. The appliance has its own intake and discharge openings for the convection air • don’t let walls rest on the appliance. • use a steel or concrete lintel.  inlet opening ...

  • Page 19

    19 unilux-3 200 l / 200 r / 300 colour dimension (cm) clear opening (cm 2 ) white 13.5 x 13.5 75 (incl. Fi tting) white 27.0 x 13.5 150 (incl. Fi tting) perma air (white) 43.0 x 22.0 550 • if the fi re is to be placed against a bearing wall or against a wall containing fl ammable material, an air ga...

  • Page 20

    20 unilux-3 200 l / 200 r / 300 • disassembling the smoke outlet top-connection. • pull the stovepipe or the stainless steel (fl exible) pipe downwards through the appliance and secure it to the smoke outlet connection. Stainless steel fl exible.

  • Page 21

    21 unilux-3 200 l / 200 r / 300 stovepipe of steel fix with hose clamp (minimum 2 pieces per connection.) • push the smoke outlet connection back upwards and secure it in place. • replace the brake plate and the complete interior..

  • Page 22

    22 unilux-3 200 l / 200 r / 300 4. Operation of the fireplace insert figure 2: operation unilux-3 200 l / 200 r / 300 1 handle 2 ceramic heat-proof glass, front 3 smoke outlet (can be dismounted) 4 convection air escape opening (permanent) 5 internal panels (vermiculite plate) / inner lining 6 ceram...

  • Page 23

    23 unilux-3 200 l / 200 r / 300 5. Stoking up for the first time if you have had your chimney breast modifi ed or newly built, fi rst allow your home to dry properly. Walls which have not been allowed to dry properly are a magnet for dust such as any smoke particles created when stoking up the fi re...

  • Page 24

    24 unilux-3 200 l / 200 r / 300 6. Use 6.1. Ventilation air is a vital component of the combustion process. Ensure that there is a suffi cient supply of fresh air. For each kilo of wood that you put on the fi re (door closed), 10 - 15 m 3 of extra air is needed. That means 50 m 3 per hour! As you ca...

  • Page 25

    25 unilux-3 200 l / 200 r / 300 we recommend that you maintain a substantial layer of ash (2 - 3 cm). This not only forms a protective layer for the base of the appliance but also signifi cantly reduces consumption of fuel and allows new wood to catch light easier. When loading the fi re with fuel, ...

  • Page 26

    26 unilux-3 200 l / 200 r / 300 continuous stoking with the primary air supply open (combustion air supply slider is right over to the “ + “ position) (air through the grate) causes a fi ercely white-hot fi re that can damage the grate and other parts of the fi replace. Ventilation when using the fi...

  • Page 27

    27 unilux-3 200 l / 200 r / 300 6.5. Cleaning the window after several burning hours, a light deposit may form on the inner side of the window. Once the fi re has cooled down, this deposit can be removed using glass cleaner or ceramic hob cleaner..

  • Page 28

    28 unilux-3 200 l / 200 r / 300 7. General hints 7.1. Tips • burn dry wood only. Damp wood not only burns poorly, it causes more pollution in the appliance (window), the chimney, your room (when opening the door of the appliance, for instance) and the environment. Wood can only be classifi ed as dry...

  • Page 29

    29 unilux-3 200 l / 200 r / 300 • chimney fi re. If, despite all the precautions, a fi re should occur in the chimney (you generally notice that because of a roaring sound in the chimney), do the following: • immediately shut the chimney fl ap (if fi tted). • immediately shut the air supply to the f...

  • Page 30

    30 unilux-3 200 l / 200 r / 300 • excessive chimney draught. The combustion air does not reach the fuel, but leaves the appliance via the chimney. The fi re cools and the combustion quality decreases. • using too much wood. This is a problem if your fi replace insert is too small. In that case, it b...

  • Page 31

    31 unilux-3 200 l / 200 r / 300 8. Fuels 8.1. Wood suitable fuels are: • all sorts of clean wood (forested). The wood must have been dried for at least two years. Well-dried wood has a humidity percentage between 10 and 20%. Recommended dimensions: length : ca. 15 cm outline : ca. 40 cm • compressed...

  • Page 32

    32 unilux-3 200 l / 200 r / 300 9. Amount of fuel 9.1. Amount of fuel the fi re is constructed for a certain maximum amount of fuel. Remember that the more fuel you put into your fi re, the hotter it will become and overheating may even occur. If this happens, there is a risk of fi re. It may also d...

  • Page 33

    33 unilux-3 200 l / 200 r / 300 9.2. Heat radiation the table below shows the temperatures which can theoretically be achieved by burning wood. Heat radiation sort of fuel kwh/kg dry wood (average) 4.3 the heating value of wood (18.7 mj/kg at 0% humidity) is not affected by the sort of wood. What do...

  • Page 34

    34 unilux-3 200 l / 200 r / 300 10. Regular maintenance • emptying the ashtray : weekly, 48 hours after last heating • cleaning the glass : as required • door and ashtray seals : check annually before heating is resumed. Replace as necessary • sweep and inspect chimney : annually before heating is r...

  • Page 35

    35 unilux-3 200 l / 200 r / 300 11. Replacement parts 11.1 unilux-3 200 l when ordering, please give the serial number. 1 2 6 10 7 13 12 11 8 17 16 3 4 15 14 5 9 18 item no description number 1 body 1 2 smoke connection 1 3 brake plate (vermiculite plate) 1 4 internal panel rear, l/r (vermiculite pl...

  • Page 36

    36 unilux-3 200 l / 200 r / 300 11.2 unilux-3 200 r when ordering, please give the serial number. 1 2 3 4 5 9 8 6 7 10 17 18 15 14 12 11 13 16 item no description number 1 body 1 2 smoke connection 1 3 glass, side r 1 4 side panel, r 1 5 wood rack, side 1 6 bottom plate, r (vermiculite plate) 1 7 gr...

  • Page 37

    37 unilux-3 200 l / 200 r / 300 11.3 unilux-3 300 when ordering, please give the serial number. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 16 17 18 15 item no description number 1 body 1 2 smoke connection 1 3 glass, side r 1 4 side panel, r 1 5 wood rack, side 2 6 bottom plate, l/r (vermiculite plate) 2 7 as...

  • Page 38

    38 unilux-3 200 l / 200 r / 300 sequence for replacing the interior of the appliance: - remove the grate. - remove the ashtray. - remove the wood rack in the front. - remove the bottom plate in the front. - remove the bottom plate, l and r..

  • Page 39

    39 unilux-3 200 l / 200 r / 300 - disassemble the air guidance strip. - remove the brake plate. - lift the brake plate and turn the brake plate bracket to the back..

  • Page 40

    40 unilux-3 200 l / 200 r / 300 - remove the side internal panel. - remove the rear internal panel..

  • Page 41

    41 unilux-3 200 l / 200 r / 300 the entire interior is now disassembled. The interior is reassembled in the reverse order..

  • Page 42

    42 unilux-3 200 l / 200 r / 300 12. Dimensions 12.1 unilux-3 200 l.

  • Page 43

    43 unilux-3 200 l / 200 r / 300 12.2 unilux-3 200 r.

  • Page 44

    44 unilux-3 200 l / 200 r / 300 12.3 unilux-3 300

  • Page 45

    45 unilux-3 200 l / 200 r / 300 13. Technical data unilux-3 200 l / 200 r / 300 combustion: measured in compliance with en 13229 : 2001 and en 13229 - a2 : 2004 fuel wood output; min. - max. 5 - 11 kw nominal output 8 kw effi ciency 70% pm10 dust emissions 62 mg/m 3 n flue gas mass fl ow 8.4 g/s flu...

  • Page 46

    46 unilux-3 200 l / 200 r / 300 14. Frequently asked questions how often should i have my chimney swept? At least once a year. If you use your fi re more than three times a week on average, have your chimney swept more often. Have the chimney swept by a recognised company. Your fi re insurance polic...

  • Page 47

    47 unilux-3 200 l / 200 r / 300 what is wrong with a smoking chimney? A seriously smoking chimney means that combustion is less than optimum. There may be a number of reasons for this. If the fi re has only just caught on, or has recently been topped up, some smoke is normal. By opening the door for...

  • Page 48

    48 unilux-3 200 l / 200 r / 300 do i have to take any extra measures if the room i am heating has an extractor fan (mechanical ventilation)? A fl ue gas fan is required for permanent extraction of the area in which the fi replace is placed. The type of fl ue gas fan depends on the capacity of the ex...

  • Page 49

    49 unilux-3 200 l / 200 r / 300

  • Page 50

    50 unilux-3 200 l / 200 r / 300

  • Page 52

    01 - 010710 - 328164 interfocos b.V. Hallenstraat 17 5531 ab bladel nederland e-mail: info@barbas.Nl internet: www.Barbas.Com.