Barbeques Galore CDBL Assembly Instructions Manual - page 3
Manual is about: Cordon Bleu Bench Top
of
9
1
Attach The Magnets To The Cross Brace
Screw the magnets to the cross brace.
Ensure the magnetic strips are facing outwards.
WHAT YOU NEED
WHAT YOU NEED
1 X Top Panel
2 X Magnets
4 X M3*12 Screws
2
Fit The Cross Brace to the cart
Fit the cross brace as shown, allowing it to rest on the side panel
Support flaps
Ensure the magnets are facing outwards.
Screw into place using the 4 X M6*15 screws.
4X M6*15 screws