Connoisseur code: g4cnsm assembly and operation instructions model: kyq-g41s-g tools required: 1x phillips head screwdriver 1x adjustable spanner for outdoor use only- operates on lpg important！ please read these instructions carefully before use. Retain these instructions for future reference gas c...
Safety first hazardous fire or explosion may result if instructions are ignored it is the consumer’s responsibility to see that the barbeque is properly assembled, installed, and maintained. Failure to follow instructions in this manual could result in bodily injury and/or property damage. For your ...
Important: read all operating instruction before lighting. 1. Do not perform any servicing on the barbeque yourself. This includes internal adjustment of the regulator and gas valves. Servicing can only be carried out by authorised technicians. 2. When cylinder is replaced or reconnected, always che...
Only use this barbeque outdoors. This barbeque must be only used in an above ground open air situation with natural ventilation, without stagnant areas, where any gas leakage and products of combustion are rapidly dispersed by wind and natural convection. Do not obstruct the flow of combustion air t...
Gas cylinder safety before assembling your barbeque, you should ensure your barbeque is suited to the type of gas which you are going to use. This is a low pressure barbeque and must only be used with the hose and regulator supplied. Your barbeque is designed for use with 4kg or 9kg refillable propa...
Other important points: strong winds and low temperatures can affect the heating and performance of your gas bbq, so factor in these elements when positioning your barbeque outdoors for cooking. Never use your gas barbeque in a garage, porch, shed, breezeway or any other enclosed area. Your gas barb...
15 34 44 42 52 35 38 39 25 24 23 19 22 20 26 27 28 30 29 21 31 48 41 36 37 33 32 40 18 17 16 43 51 45 45 14 50 53 49 46 47 47 46 49 54 6 13 8 5 12 13 2 14 3 3 10 9 7 4 11 1 part list: g4cnsm.
Parts #glg code glg description part qty per bbq qty per part code 1 kyq-g4sm-1 complete hood without temperature gauge, handle or buffers 1 1 6 kyq-g4sm-6 hood glass 1 1 11 kyq-g4sm-11 temperature gauge 1 1 12 kyq-g4s00-3 hood handle 1 1 13 kyq-g4s00-4 protective pad-front 2 2 14 protective pad-rea...
Hard ware list: g4cnsm assembly instructions warning: whilst every effort has made in manufacture of your barbeque to remove any sharp edges, nevertheless, you should handle all components with care to avoid accidental injury. Tools required: standard philips crosshead screwdriver and an adjustable ...
# 48 # b m6×12mm×4 pcs # b m6×12mm×6 pcs # 53 # c hex m6×20mm×4 pcs # d ￠6 lock washer×4 pcs # e ￠6 flat washer×4 pcs # 45 # 45 step 3 step 4 step 5 step 6 # 47 # 46 # 46 # 47.
# 50 # 51 # b m6×12mmx2 pcs # 42 # 43 # a m4×10mm×2 pcs # 40 # 38 step 7 step 8 step 9.
# b m6×12mm×4 pcs loosen the prefitted screws (both side), keep 6mm gap, as shown. 6m m gap step 10 step 11.
Hang the side tables on the pre-fixed screws, then tighten the screws with a screwdriver remove the nut from the nozzle assembly, attach the nozzle assembly through the hole in the bracket, and fix with the nut, as shown. Tighten firmly. Step 12 # 34 # 35.
# a m4×10mm×2 pcs # 36 # 41 step 13 step 14 ref # 18 make sure the burner is engaged onto the nozzle! Ignitor wire.
Connecting to a portable lpg cylinder hang the lpg cylinder to the cylinder hook on the left side of the barbeque. Before connecting the cylinder, inspect the hose fittings and rubber seals. If there is any sign of splitting or wear. Have the parts or whole hose assembly replaced. Only use authorise...
To check for leaks: make 100 ml of leak detecting solution by mixing one part washing up liquid with 3 parts water. Ensure all the barbeque control valves are “off”. Connect the regulator to the cylinder, ensure the connections are secure then turn on the gas. Brush the soapy solution onto the hose ...
Off low hi off off hi low off hi low high low if you wish to turn the complete barbeque ”off” turn the cylinder valve to the “off” position and then turn the control knob on the appliance clockwise to the “off” position. Before cooking for the first time, operate the barbeque for about 15 minutes wi...
4 2 3 1 11 9 6 7 8 10 5 remove cooking grill and hotplate. Clean the burner with a soft brush or blow clean with compressed air and wipe with a cloth. Clean any clogged ports with a pipe cleaner or stiff wire (such as an opened paper clip). Inspect burner for any damage (cracks or holes). If damage ...
Motor kit ref # description qty 1 motor 1 2 motor mounting bracket 1 3 rotisserie bracket 1 4 m6 nut 4 5 m6x12 screw 4 rotisserie shaft kit ref # description qty 6 meat prong (including locking screw) 2 7 locating ring (including locking screw) 1 8 rolling ring 1 9 rotisserie shaft tail 1 10 handle ...
How to maintain your bbq: 1 wipe over the stainless steel surface with rust resistant oil or 3n stainless steel cleaner & polish when you store the barbeque or after use. 2.Fit a rainproof cover over the bbq when it is not in use. Use a vented cover, and/or add a couple of sponges under the cover to...
If the hose is replaced it must be secured to the appliance using a spanner to tighten it onto the connection thread. Always check for leaks after making any new connections. Disconnect the regulator from the cylinder only (according to the directions supplied with the regulator) when the barbeque i...
