Barbeques Galore MC2CDFFL Instructions manual - Assembling Your Side Burner

Manual is about: Cordon Bleu side burner and/or folding shelves

Summary of MC2CDFFL

  • Page 1

    Instructions for the safe use and enjoyment of your new side burner and/or folding shelves cordon bleu side burner and/or folding shelves tools required: 2 adjustable spanners 1 phillips head screwdriver welcome to the world of barbeques galore outdoor cooking code:mc2cdfsl or mc2cdffl if you also p...

  • Page 2: Safety First

    2 safety first congratulations on your purchase a if you have purchased a side burner ustralia has an excellent safety record when it comes to gas appliances. This re ects both the high quality of appliances sold, as well as growing consumer awareness about safe practice. We urge you to follow the g...

  • Page 3: Where to Put Your Barbeque

    3 most importantly, you must observe the clearances listed on the data sticker on your barbeque. It will tell you how close you can put the appliance to combustible surfaces (wood, gyprock, trees, wooden fences etc). If you don’t follow these clearances, there is a chance that nearby surfaces will h...

  • Page 4: Assembling Your Side Burner

    4 assembling your side burner checking the gas type important! Before assembling the side burner, you should ensure it is suited to the same gas type as your barbeque. Check the gas type sticker on both your barbecue and side burner. If your barbeque or side burner is suited to lpg, it should have a...

  • Page 5: Assembling Your Side Burner

    5 assembling your side burner step 3: attach the folding side shelf brackets screw the side table bracket sets to the left side of the barbeque using 4pcs 30mm long and the 2pcs what you need 4 x 30mm long screws remove the 4 screws on the left side of the barbeque as shown. Attach the side shelf to...

  • Page 6: Assembling Your Side Burner

    6 assembling your side burner if the folding feature is not required, the shelf can be securely locked into the horizontal position using the locking nut and bolt as shown. What you need 2 x locking nuts and bolts (2 for each folding shelf) if you have 2 side shelves (no side burner) repeat for the ...

  • Page 7: Assembling Your Side Burner

    7 what you need step 5: attach the side burner (if purchased) assembling your side burner 7 x 15mm short screws remove the 4 screws on the right side of the barbeque as shown. Remove these screws screw 6pcs * 15mm short screws into the right side of the barbeque as shown. Do not screw in all the way...

  • Page 8: Connecting The Gas

    8 step 6 connect the corrugated gas pipe side burner to barbeque connecting corrugated pipe take out the tray disconnect the gas tube cap connector the ripple pipe to the barbecue. Connecting the gas the side burner corrugated gas pipe will already be connected to the side burner.You need to connect...

  • Page 9: Connecting The Gas

    9 before proceeding, it is important that you leak test all gas line s and connections on the barbeque. Make sure all the barbeque and side burner control knobs are off. If you have a portable gas cylinder, turn the cylinder on by rotating the knob anti-clockwise. If you have a wall connection, ensu...

  • Page 10: Lighting Your Side Burner

    10 the knobs have three basic positions: off, hi and lo . You can achieve any height between lo and hi by rotating the side burner control knob between these positions. Controlling the flames lighting your side burner burner on high burner on low light the side burner in the same way as for your mai...

  • Page 11: Maintenance

    11 maintenance cleaning your side burner your side burner will look better and last longer if you keep it clean. Follow these simple steps. The burner: occasionally the burner holes may get clogged with grease or food particles. Leaving the burner on high for a maximum of 5 minutes with the lid open...

  • Page 12: Maintenance

    12 maintenance if there are any signs of wear or cracking in the side burner pipe, you will need to replace it immediately. Ensure you replace it with the correct part purchased from barbeques galore to ensure proper gas connection compatibility. Connect the nut of the corrugated pipe to the gas inl...

  • Page 13: Exploded Drawing - Part List

    13 exploded drawing - part list 1 cp9095538 cp9095546 cp9095548 cp9095547 cp9095539 cp9095540 cp9095516 cp9095515 cp9095537 cp9095542 cp9095543 cp9095544 cp9095557 cp9095545 copper ring 2 side burner 9 side burner trivet 3 cbgasext corrugated gas pipe 10 side burner lid hinge 4 side burner shelf ass...

  • Page 14: More Information?

    14 g.L.G. Australia pty ltd (acn 001 185 002) building a2, campus business park, 350-374 parramatta road homebush nsw 2140 ph. 02 9735 4111 more information? Www.Barbequesgalore.Com.Au need more information or assistance in any way? You can call your barbeques galore store where barbeque experts wil...