1. DL manuals
  2. Barbie
  3. Bicycle
  4. BARBIE 74518
  5. Owner's Manual & Assembly Instructions

Barbie BARBIE 74518 Owner's Manual & Assembly Instructions

Manual is about: Fisher-Price Bicycle User Manual

Summary of BARBIE 74518

  • Page 1

    Owner’s manual with assembly instructions please read this manual and save it with your original sales receipt. For model 74518 product features may vary from the picture above. Cycle tools needed for assembly: phillips screwdriver, hammer, slotted screwdriver, and safety scissors. Use only with a p...

  • Page 2: Caution

    Caution use the charger indoors only. 2 important information a important information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 b warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 3: Warning

    Warning • children can be harmed by small parts, sharp edges and sharp points in the vehicle’s unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle. • keep...

  • Page 4: Parts

    4 • if you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store. • please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. • me...

  • Page 5: Parts

    5 parts fairing not shown: label sheets 6 volt battery l left handlebar vehicle body seat front axle right handlebar front wheel handle wheel bushing – 2 #8 x 7 / 8 " screw cap nut – 3* #8 x 1 1 / 2 " screw – 4 25 amp fuse – 2* radio knob – 2 gas cap #8 x 3 / 4 " screw – 4 all screws shown actual si...

  • Page 6: Parts Diagram

    6 1. Vehicle body 2. Fender 3. Inner shock half - 2 4. Outer shock half - 2 5. Cap nut - 2 6. Front axle 7. Hubcap - 2 8. Wheel bushing - 2 9. Front wheel 10. Headlight lens - 2 11. Fairing 12. Right handlebar 13. Left handlebar 14. Handlebar plug - 2 15. Handgrip - 2 16. Handgrip streamer - 2 17. S...

  • Page 7: Warning

    Important notes: • your new battery must be charged for at least 18 hours before you use it in your vehicle for the first time. • we recommend that you start charging your battery before beginning assembly of your new vehicle. • the battery must be upright while charging. • the charger is not a toy....

  • Page 8: Battery Charging

    ® • plug the charger into a standard wall outlet. Note: if power flow to the wall outlet is controlled by a switch, make sure the switch is “on”. • before first-time use, charge the battery for at least 18 hours. Never charge the battery longer than 30 hours. Note: the battery must be upright while ...

  • Page 9: Assembly

    Swivel bracket left handlebar • stand the vehicle body on its rear wheels. • slide the left handlebar through the holes in the left side of the swivel bracket. Note: the left handlebar is marked “l”; the right handlebar is marked “r”. • position the ribbed end of a handlebar plug against the top end...

  • Page 10: Assembly

    10 7 • position the vehicle body upright. • fit the dashboard onto the top of the swivel bracket. • align the screw holes in the dashboard and swivel bracket. • insert two #8 x 1 1 / 2 " screws into the dashboard. • tighten each screw with a phillips screwdriver. Do not over-tighten. • stand the veh...

  • Page 11: Assembly

    11 assembly • fit the fender onto the ends of the handlebars. (make sure the end of the fender marked front is facing toward the front of the vehicle.) • slide the fender up the handlebars to the fairing. • fit one end of the front axle into a cap nut. • tap the front axle with a hammer to secure th...

  • Page 12: Assembly

    12 • position the front wheel between the handlebars. • slide the front axle through the front wheel. 17 assembly • fit and hold an inner shock half to the inside of a handlebar. • fit and hold an outer shock half to the outside of the same handlebar. • make sure the top ends of the shock halves fit...

  • Page 13: Assembly

    13 assembly • position the vehicle upright. • apply headlight labels to the fairing as shown. • make sure the areas where the labels will be applied are clean and dry. 19 18 • slide the front axle through the handlebar. Note: if the front axle will not slide through the handlebar, the handlebar may ...

  • Page 14: Assembly

    #12 x 1 1 / 4 " screw shown actual size assembly • position the handle so that it arcs away from the handlebar. (the screw holes in the back side of the handle should face through the rear of the vehicle). • fit the bottom of the handle into the storage compartment. Push firmly to make sure the hand...

  • Page 15: Label Decoration

    Barbie is a trademark owned and used under license from mattel, inc. © 1997 mattel, inc. All rights reserved. Label decoration proper label application will help to keep the labels looking their best! • wash your hands before applying the labels. • make sure the areas where the labels will be applie...

  • Page 16: Battery Installation

    • lift the seat to access the battery compartment. 1 • place the battery upright in the battery compartment. Make sure the battery connector extends towards the rear of the vehicle. • make sure a power wheels ® 25 amp fuse in good condition is installed in the battery. • insert the ends of the batte...

  • Page 17: Battery Installation

    17 battery installation • rotate the lock fastener 1 / 4 turn using a slotted screw- driver to lock the battery compartment. • to make sure the lock fastener is locked, insert the blade of the screwdriver under the back of the seat and push down on the screwdriver handle. The seat should not lift. 6...

  • Page 18: Warning

    10˚ incline should never be more than 10° 5. Do not operate this vehicle with more than one rider, seated on the seating area. A child who is not sitting on the seat or who is standing on the vehicle could fall off, cause a tip-over or block the driver’s view. A child could be seriously injured. 6. ...

  • Page 19: How to Operate

    How to operate your vehicle 19 k caring for your vehicle l • check all screws, retainers and protective coverings regularly and tighten as required. Check plastic parts on a regular basis for cracks or broken pieces. • during snowy or rainy weather, the vehicle should be stored inside or under a pro...

  • Page 20: Problems and Solutions Guide

    Problem possible cause solution vehicle does not run undercharged battery charge the battery. A new battery should have been charged for at least 18 hours before using the vehicle for the first time. After first-time use, recharge the battery for at least 14 hours after each use. Never charge the ba...

  • Page 21: Problems and Solutions Guide

    Vehicle was running but loose wire or loose connectors check all wires and connectors. Make sure the battery suddenly stopped connector is tightly plugged into the motor harness connector, and that there are no loose wires around the motors. Wrong type or improperly installed fuse make sure that the...

  • Page 22: Problems and Solutions Guide

    Problem possible cause solution vehicle runs sluggishly undercharged battery charge the battery. A new battery should have been charged for at least 18 hours before using the vehicle for the first time. After first-time use, recharge the battery for at least 14 hours after each use. Never charge the...

  • Page 23: Problems and Solutions Guide

    Problem possible cause solution vehicle constantly blows fuses wrong type of fuse used your vehicle requires a power wheels ® 25 amp fuse in the battery. Make sure the power wheels ® 25 amp fuse is properly installed. For best performance, do not use substitute parts. Child is switching between teac...

  • Page 24: Authorized Service Centers

    We are continually expanding our authorized service center network. Please check this listing for the authorized service center nearest you. If there is not one in your area, please call power wheels ® consumer affairs at 1-800-348-0751. 24 alabama birmingham - frigid service & sales, 701 graymont a...

  • Page 25: Authorized Service Centers

    25 alabama birmingham - frigid service & sales, 701 graymont ave. North, 35203, (205) 323-5831 birmingham - frigid service & sales, 1861 centerpoint rd., 35215, (205) 853-3952 birmingham (homewood) - d & r appliance company, 154 west valley ave., 35209, (205) 942-3959 decatur - peddler ii, 1000 b be...

  • Page 26: Authorized Service Centers

    26 alabama birmingham - frigid service & sales, 701 graymont ave. North, 35203, (205) 323-5831 birmingham - frigid service & sales, 1861 centerpoint rd., 35215, (205) 853-3952 birmingham (homewood) - d & r appliance company, 154 west valley ave., 35209, (205) 942-3959 decatur - peddler ii, 1000 b be...

  • Page 27: Authorized Service Centers

    27 alabama birmingham - frigid service & sales, 701 graymont ave. North, 35203, (205) 323-5831 birmingham - frigid service & sales, 1861 centerpoint rd., 35215, (205) 853-3952 birmingham (homewood) - d & r appliance company, 154 west valley ave., 35209, (205) 942-3959 decatur - peddler ii, 1000 b be...

  • Page 28: 1-800-348-0751

    Fisher-price, inc., a subsidiary of mattel, inc., east aurora, new york 14052 ©1998 mattel, inc. - all rights reserved. Do not return your vehicle to the store if you are missing parts or need assistance, please call us toll-free: power wheels consumer affairs 1-800-348-0751 8 am - 6 pm est, monday ...