Butterfly trike model number: 72639 please keep these instructions for future reference. Adult assembly is required. Tools needed for assembly: hammer, phillips screwdriver, scrap block of wood. If you have any questions about this product, or are missing a part, please call us toll-free at 1-800-43...
Fisher-price, inc., a subsidiary of mattel, inc. East aurora, new york 14052, u.S.A. ©1999 mattel, inc. All rights reserved. Printed in mexico ® and ™ designate u.S. Trademarks of mattel, inc. 72639a-0921 barbie is a u. S. Trademark of mattel, inc. Parts #8 x 3" screw – 1 #8 x 3 / 4 " screw – 4 (all...
• place a cap nut on a scrap block of wood. • place one end of the straight axle into the cap nut. • tap the end of the straight axle with a hammer. Make sure the cap nut is securely attached to the straight axle. • slide a hubcap (peg side up) onto the straight axle. • slide a rear wheel (indented ...
• fit two pedal hubs onto the pedal axle metal tabs. Make sure the metal tabs fit into the slot in each pedal axle cover. Pedal hub pedal hub pedal axle metal tab metal tab slot • while holding the pedal hubs on the pedal axle, insert the pedal axle into the hole in the center of the front wheel. Ho...
5 pedal hubs pedal hub pedal hub pedal axle • turn the front wheel assembly over. • insert a pedal hub onto the top of the pedal axle and into the hole in the center of the front wheel. • insert the remaining pedal hub below the pedal axle and into the hole in the center of the front wheel. • push t...
6 • turn the frame upright. • insert the fork post up through the hole in the neck of the frame. Make sure the fork is positioned so that the fork covers face the rear wheels. • place the handlebar over the fork post and push it down onto the frame. Make sure the handlebar is positioned so that the ...
7 proper label application will help to keep the labels looking their best! • wash your hands before applying the labels. • make sure the areas where the labels will be applied are clean and dry. Wipe your vehicle with a clean, soft, dry cloth to remove any dust or oils. • for best results, avoid ap...
8 • check plastic parts regularly and if broken or cracked, dispose of them properly. • check all fasteners regularly to be sure they are tight. If the fasteners are not tight, tighten them as necessary. • to clean the trike, use a mild soap and water solution and a clean cloth. Rinse clean with wat...
