Installation manual r9001450 data 3300 tcr p lus.
Barco projection systems installation manual date : 121097 art. No. : r5975129 r9001450 data 3300 tcr p lus.
Federal communication commission (fcc statement) this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operat...
Table of contents i-1 5975129 barcodata 3300 tcr p lus 121098 i table of contents table of contents .............................................................................................................................................................................. I-1 installation mode ......
2-1 installation mode 5975129 barcodata 3300 tcr p lus 121098 1 installation mode starting up the installation mode push the control disc up or down to highlight installation and then press enter. Adjustment mode select a path from below : random access installation service source 01 installation in...
2-2 installation mode 5975129 barcodata 3300 tcr p lus 121098 33 mm convergence adjustment of the lcd panels. Every lcd panel has 6 adjustment screws. By turning these screws you change the relative position of the panels and converge the image. Always start with the adjustment of the green panel. W...
2-3 installation mode 5975129 barcodata 3300 tcr p lus 121098 green focusing a. Insure all convergence screws are adjusted to a length of about 33 mm (1.3") between the two plates. B. Adjust the projection lens until optimal focus for point 1 is obtained. C. Turn screw 2 for optimal focus of the cor...
2-4 installation mode 5975129 barcodata 3300 tcr p lus 121098 l. Due to interaction, turning on screw 4, 5 and 6 can influence the focus of the image. If necessary, repeat procedure from step b. . Red on green convergence. Push the control disc up or down to highlight red on green and press enter to...
2-5 installation mode 5975129 barcodata 3300 tcr p lus 121098 -0,5 -0 ,2 5 0 0 ,2 5 0,5 1 2 3 4 5 6 80 1 2 0 16 0 2 00 2 40 4 0 30 1 5 -1,5 -1 -0,5 0 0,5 1 1,5 1 2 3 4 5 6 80 120 160 200 240 40 90 60 30 screen width horizontal screen shift 0 -15 -30 maximum 5 mm right lens shift maximum 5 mm left le...
2-1 hardware set up 5975119 barcodata 3300 121098 2 how to activate the password function? 1 on off hardware set up the password function can be hardware set with a dip switch on the cpu module. To change the position of this dip switch, it is necessary to open first the top cover. Gaining access to...
