1. DL manuals
  2. Barco
  3. Projector
  4. BARCOREALITY 8200TCR+
  5. Owner's Manual

Barco BARCOREALITY 8200TCR+ Owner's Manual

Summary of BARCOREALITY 8200TCR+

  • Page 1

    Owner's manual reality 8200 tcr+ r9001430

  • Page 3

    Barco projection systems date : 010998 owner's manual reality 8200 tcr+ r9001430 art. No. : r5975928.

  • Page 4

    Due to constant research, the information in this manual is subject to change without notice. Produced by barco nv, september1998. All rights reserved. Trademarks are the rights of their respective owners. Barco n.V./projection systems noordlaan 5 b-8520 kuurne belgium tel : +32/56/368211 fax : +32/...

  • Page 5

    I-1 table of contents 5975928 barcoreality 8200tcr+ 010998 table of contents ........................................................................................................................................................................... I-1 unpacking and dimensions .........................

  • Page 6

    I-2 table of contents 5975928 barcoreality 8200tcr+ 010998 options ........................................................................................................................................................................................ 8-11 installation mode ............................

  • Page 7

    1-1 unpacking and dimensions 5975928 barcoreality 8200tcr+ 010998 1 1 2 3 4 5 3 7 9 pull to open 4 630 13 5 702 52,8 978,4 1023,4 27,1 72,1 19 5 41,5 32 3 284 569 unpacking and dimensions unpacking to open the banding, pull on the clip as shown in the first drawing. Take the projector out of its shi...

  • Page 8

    1-2 unpacking and dimensions 5975928 barcoreality 8200tcr+ 010998 310a.Drw battery installation in the rcu. A battery (not yet installed to save the battery life time) is delivered inside the plastic bag with the power cord. To install the battery, remove the battery cover on the backside of the rem...

  • Page 9

    2-1 installation guidelines 5975928 barcoreality 8200tcr+ 010998 2 installation guidelines 6fuhhqzlgwk installation guidelines careful consideration of things as image size, ambient light level, projector placement and type of screen to use are critical to the optimum use of the projection system. *...

  • Page 10

    2-2 installation guidelines 5975928 barcoreality 8200tcr+ 010998 b = distance between ceiling and top of the screen or between floor and bottom of the screen. A = correction value, distance between bottom side of projector (without feed) and middle of the lens. Value to be subtracted from b to obtai...

  • Page 11

    3-1 location and functions of control 5975928 barcoreality 8200tcr+ 020798 3 rs 232 in remote projector mode : green - operation red - standby communication port (800-peripherals) rs232 ou t ir-acknowledged ir-received diagnostics code ir-receiver 9 $ +] 0 i t h i s d e v i c e co m p l i e s w i t ...

  • Page 12

    3-2 location and functions of control 5975928 barcoreality 8200tcr+ 020798 - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 (17(5 32a 3$86( - + 3+$6( )5((= 7(;7 (;,7 $'- 67% 6+$531(66 7,17 &2/25 %5,*+71(66 &2175$67 +(/3 ? Color phase sharpn tint brightn standby enter text exit pause &2175$67 b. Remote contro...

  • Page 13

    Installation set up 4-1 5975928 barcoreality 8200tcr+ 010998 4 )urqw7deoh )urqw&hlolqj 5hdu7deoh 5hdu&hlolqj installation set up the projector can be installed to project images in four different configurations : front/table, front/ceiling, rear/table and rear/ceiling. To change the configuration, e...

  • Page 14

    Installation set up 4-2 5975928 barcoreality 8200tcr+ 010998.

  • Page 15

    5-1 connections 5975928 barcoreality 8200tcr+ 010998 5 r g b v r g b h / c v on 98 2791 0 r g b h / c v h 9,'(2,1387 9,'(2 69,'(2 rs 232 in remote projector mode : green - operation red - standby communication port (800-peripherals) r s232 out ir-acknowledged ir-received diagnostics code ir-receiver...

  • Page 16

    5-2 connections 5975928 barcoreality 8200tcr+ 010998 r g b v r g b h / c v on 98 27 910 r g b h / c v h 9,'(2,1387 9, '(2 69,'(2 rs 232 in remote projector mode : green - operation red - standby communication port (800-peripherals) rs 232 o ut ir-acknowledged ir-received d ia gn ostics c ode ir-r ec...

  • Page 17

    5-3 connections 5975928 barcoreality 8200tcr+ 010998 select with or then to return. 21 2)) % + * 5 9 ,13 ,13 ,1387 $1$/2*,17(5)$&(0+] r g b v r g b h / c v on 9 8 27 91 0 r g b h / c v h 9,'(2,1387 9,'(2 69,'(2 rs 232 in remote projector mode : green - operation red - standby communication port (800...

  • Page 18

    5-4 connections 5975928 barcoreality 8200tcr+ 010998 r g b v r g b h / c v h rs 232 in remote projector mode : green - operation red - standby communication port (800-peripherals) rs232 out ir-acknowledged ir-received diagnostics code fixed 5-input slot (slot 2) slot 2 has 5 bnc input terminals. The...

  • Page 19

    5-5 connections 5975928 barcoreality 8200tcr+ 010998 s-video 98 27 9 0 0 video l r audio 9,'(269,'(2,1387 on on t v tu n er, e .G . T v d m 40 ste re o v c r a ud io a m p lifie r c om po site v ide o vcr s-vhs luma/chroma r g b v r g b h / c v on 98 27910 r g b h / c v h 9,'(2,1387 9,'(2 69,'(2 rs ...

  • Page 20

    5-6 connections 5975928 barcoreality 8200tcr+ 010998 r g b h / c v on 5*%$1$/2*,1387 98 2791 0 )ordwlqjruqrqiordwlqjlqsxw floating non-floating -6\qfvhohfwlrq 6hsdudwhv\qf 6\qfrqjuhhq - - - - - 21 2)) % + * 5 9 ,13 ,13 ,1387 $1$/2*,17(5)$&(0+] r g b v r g b h / c v on 9 8 27 91 0 r g b h / c v h 9,'...

  • Page 21

    5-7 connections 5975928 barcoreality 8200tcr+ 010998 select with or then to return. Select with or then to return. Hdtv vcr r g b v r g b h / c v on 98 279 10 r g b h / c v h 9,'(2,1387 9,'(2 69,'(2 rs 232 in remote projector mode : green - operation red - standby communication port (800-peripherals...

  • Page 22

    5-8 connections 5975928 barcoreality 8200tcr+ 010998 r g b h / c v on 5*%/(9(/6 9 8 2 7920 hdtv vcr r g b v r g b h / c v on 98 279 10 r g b h / c v h 9,'(2,1387 9,'(2 69,'(2 rs 232 in remote projector mode : green - operation red - standby communication port (800-peripherals) r s232 o u t ir-acknow...

  • Page 23

    5-9 connections 5975928 barcoreality 8200tcr+ 010998 d ig it a l v id e o s o u r c e d ig ita l v id e o r g b v r g b h / c v on 98 27 910 r g b h / c v h 9,'(2,1387 9,'(2 69,'(2 rs 232 in remote projector mode : green - operation red - standby communication port (800-peripherals) rs232 out ir-ack...

  • Page 24

    5-10 connections 5975928 barcoreality 8200tcr+ 010998 screen communication cable projector ir remote receiver 800 projection room control room 56 frqqhfwlrq r g b v r g b h / c v on 98 27 9 1 0 r g b h / c v h 9,'(2,1387 9,'(2 69,'(2 rs 232 in remote projector mode : green - operation red - standby ...

  • Page 25

    6-1 controlling 5975928 barcoreality 8200tcr+ 010998 6 ceiling screen ir sensor rcu r g b v r g b h / c v on 98 279 10 r g b h / c v h 9,'(2,1387 9,'(2 69, '(2 rs 232 in remote projector mode : green - operation red - standby communication port (800-peripherals) rs232 ou t ir-acknowledged ir-receive...

  • Page 26

    6-2 controlling 5975928 barcoreality 8200tcr+ 010998 0 127 how to display a projector address? Press the address key (recessed key on the rcu) with a pencil. The projector's address will be displayed in a 'text box'. This text box disappears after a few seconds. To continue using the rcu, it is nece...

  • Page 27

    7-1 start up of the adjustment mode 5975928 barcoreality 8200tcr+ 010998 7 start up of the adjustment mode adjustment mode all source parameters, picture tuning and geometry are made while in the 'adjustment mode' . Press the adjust or enter key to enter the 'adjustment mode'. You are now in the 'ad...

  • Page 28

    7-2 start up of the adjustment mode 5975928 barcoreality 8200tcr+ 010998.

  • Page 29

    8-1 random access adjustment mode 5975928 barcoreality 8200tcr+ 010998 8 random access adjustment mode adjustment mode select a path from below : random access installation service source 01 select with or then to return. Starting up the random access adjustment mode push the control disc up or down...

  • Page 30

    8-2 random access adjustment mode 5975928 barcoreality 8200tcr+ 010998 select with or then to return. Select with or then to return. Select with or then to return. Highlight file service by pushing the control disc up or down and press enter to select. The file service menu will be displayed. Enter ...

  • Page 31

    8-3 random access adjustment mode 5975928 barcoreality 8200tcr+ 010998 the file name will be displayed in the upper right corner. The following items can be adjusted : total quantity horizontal pixels active quantity horizontal pixels horizontal start in pixels horizontal period in µs (is automatica...

  • Page 32

    8-4 random access adjustment mode 5975928 barcoreality 8200tcr+ 010998 select with or to toggle or to change value to return edit file options source number 1 clamp position [leading] clamp delay 0 clamp width 10 field polarity [pos] field select [both] vertical refresh [sync] vert. Sync polarity [l...

  • Page 33

    8-5 random access adjustment mode 5975928 barcoreality 8200tcr+ 010998 select with or then to return. Select with or then to return. Rename to change the name of a selected file. Use the control disc to select rename and press enter. The rename selection menu will be displayed. Use the control disc ...

  • Page 34

    8-6 random access adjustment mode 5975928 barcoreality 8200tcr+ 010998 select with or then to return. Select with or then to return. Select with or then to return. Delete to delete a selected file out of the list of files. Use the control disc to select delete and press enter. The delete selection m...

  • Page 35

    8-7 random access adjustment mode 5975928 barcoreality 8200tcr+ 010998 0 15 cti on/off cti : color transient improvement. To improve the transition from one color to another. Highlight cti by pushing the control disc up or down and press enter to toggle between on and off. This function applies to p...

  • Page 36

    8-8 random access adjustment mode 5975928 barcoreality 8200tcr+ 010998 3 dynamic color depth increases color contrast for all video and data sources. Highlight dynamic color depth by pushing the control disc up or down and press enter to select. Off : default position med : maximum color contrast wi...

  • Page 37

    8-9 random access adjustment mode 5975928 barcoreality 8200tcr+ 010998 select with or then to return. Random access adjustment mode file service picture tuning geometry geometry shift size side keystone blanking options select with or then to return. Geometry shift size side keystone blanking option...

  • Page 38

    8-10 random access adjustment mode 5975928 barcoreality 8200tcr+ 010998 size highlight size by pushing the control disc up or down and press enter to select. The size can be adjusted in a vertical or horizontal way. When adjusting the vertical size, the upper side of the image is fixed (table and ce...

  • Page 39

    8-11 random access adjustment mode 5975928 barcoreality 8200tcr+ 010998 adjustment of the blanking on the top of the image select with or then to return. Bottom blanking top blanking right blanking left blanking adjustment of the blanking on the bottom of the image correct by pushing the control dis...

  • Page 40

    8-12 random access adjustment mode 5975928 barcoreality 8200tcr+ 010998.

  • Page 41: Installation Mode

    9-1 installation mode 5975928 barcoreality 8200tcr+ 010998 9 select with or then to return. Select with or then to return. Installation mode starting up the installation mode push the control disk up or down to highlight installation and then press enter. Enter continues to the installation mode sel...

  • Page 42

    9-2 installation mode 5975928 barcoreality 8200tcr+ 010998 select with or then to return. Select with or then to return. 800 peripheral when a rcvds05 is connected to the projector, the type of output module of this rcvds05 has to be defined in the 800 peripheral menu. The type of output module can ...

  • Page 43

    9-3 installation mode 5975928 barcoreality 8200tcr+ 010998 convergence green to midposition green blue on green red on green hatch about moca green to midposition are you sure to set the green motorized convergence adjustment to midposition ? This adjustment cannot be undone afterwards ! To continue...

  • Page 44

    9-4 installation mode 5975928 barcoreality 8200tcr+ 010998 red on green convergence 1 highlight 'red on green' by pushing the control disk up or down and press enter to display the blue in green test pattern. The drawings and digit will be displayed in blue. 2 adjust position 1, 2 and 3 to obtain an...

  • Page 45

    9-5 installation mode 5975928 barcoreality 8200tcr+ 010998 select with or then to return. Configuration highlight "configuration" by pushing the control disk up or down and press enter to select. For more information, see projector configuration in chapter 4 : 'installation set up'. Osd color (on-sc...

  • Page 46

    9-6 installation mode 5975928 barcoreality 8200tcr+ 010998.

  • Page 47

    Service mode 10-1 5975928 barcoreality 8200tcr+ 010998 10 select with or then to return. Service mode starting up the service mode push the control disc up or down to highlight service and then press enter. Some items in the service mode are password protected (when the password function is active)....

  • Page 48

    Service mode 10-2 5975928 barcoreality 8200tcr+ 010998 service identification change password change language change proj. Address change baudrate pc reset lamp runtime lamp runtine history lamp drive mode more... Select with or then to return. Service barco logo panel adjustments preset input balan...

  • Page 49

    Service mode 10-3 5975928 barcoreality 8200tcr+ 010998 r g b v r g b h / c v on 98 27910 r g b h / c v h 9,'(2,1387 9,'(2 69,'(2 rs 232 in remote projector mode : green - operation red - standby communication port (800-peripherals) rs232 out ir-acknowledged ir-received diagnostics code ir-receiver 0...

  • Page 50

    Service mode 10-4 5975928 barcoreality 8200tcr+ 010998 select with or then to return. Select with or then to return. Select with or then to return. Service identification change password change language change proj. Address change baudrate pc reset lamp runtime lamp runtine history select with or th...

  • Page 51

    Service mode 10-5 5975928 barcoreality 8200tcr+ 010998 select with or then to return. Lamp drive mode silent normal boost select with or then to return. Lamp run time history to get an overview of the different lamp run times, highlight lamp run time history by pushing the control disc up or down an...

  • Page 52

    Service mode 10-6 5975928 barcoreality 8200tcr+ 010998 select with or then to return. Select with or then to return. Select with or then to return. I2c diagnosis. Gives an overview of the correct working of the i²c controlled ic's. Highlight i2c diagnosis by pushing the control disc up or down and p...

  • Page 53

    A-1 appendix a : standard source set up files 5975928 barcoreality 8200tcr+ 010998 a standard source set up files name : name of file, contains the settings resolution : image resolution, when fol- lowed by ...I means interlaced. Fvert hz : vertical frame frequency of the source fhor khz : horizonta...

  • Page 54

    A-2 appendix a : standard source set up files 5975928 barcoreality 8200tcr+ 010998 name resolution fvert fhor fpix ptot pact ltot lact hz khz mhz pal-3 675 x 278i 25,000 15,625 13,500 864 720 313 278 pam500 640 x 400 60,000 26,400 22,810 864 640 440 400 pam800 1120 x 375i 44,936 36,443 50,000 1372 1...

  • Page 55

    B-1 lenses 5975928 barcoreality 8200 tcr+ 010998 b lens fastener ring lens holder loosen the fastener ring of the lens by turning counter clockwise. Focus the image by turning the lens barrel to the left or the right. Attention : do not turn out the lens too far, otherwise it will fall out of the le...

  • Page 56

    B-2 lenses 5975928 barcoreality 8200 tcr+ 010998 lenses e m a n s n e l h t g n e l ) h c n i ( m m s n e l . M a i d ) h c n i ( m m t h g i e w ) s b l ( g k r e b m u n r e d r o ) 1 : 2 . 1 ( d h q ) 6 9 . 9 ( 3 5 2 ) 4 4 . 7 ( 9 8 1 ) 2 . 9 1 ( 7 . 8 0 6 7 9 2 8 9 r ) 1 : 2 . 2 ( d h ) 5 2 . 9 ...

  • Page 57

    C-1 source numbers 80 - 89 and 90 - 99 5975928 barcoreality 8200tcr+ 010998 c source numbers 80 - 89 and 90 - 99 projector without any 800 peripheral connected. The source numbers 80 - 89 and 90 - 99 do not correspond to physical inputs. An additional adjustment file can be created for these source ...

  • Page 58

    C-2 source numbers 80 - 89 and 90 - 99 5975928 barcoreality 8200tcr+ 010998 source numbers 81 - 85 only valid if no input module is connected to slot 81 - 85 of a rcvds05. The source numbers 81 - 85 correspond to the physical inputs 1 - 5 of the projector. E.G. When slot 1 of the projector has to be...

  • Page 59

    5975928 barcoreality 8200tcr+ 010998 3 5&8 ,13876285&(6 352-(&725 5&9'6 ,13876285&(6 3 5&8 ,13876285&(6 352-(&725 5&9'6 ,13876285&(6.