B arco p rojection a nalyser k it for r/g 6300/6400 and sim6 o wner ’ s m anual 01122003 r5976046/03.
Barco nv intelligent displays noordlaan 5, 8520 kuurne phone: +32 56.36.82.11 fax: +32 56.35.86.51 e-mail: presentations.Bid@barco.Com visit us at the web: www.Barco.Com printed in belgium.
Copyright © all rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be recorded, transmitted or stored in a retrieval system without the prior written consent of barco. Trademarks brand and product names mentioned in this manual may be trademarks...
Table of contents table of contents 1. Kit description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1 introduction. . . . . . . . . . . ....
Table of contents 2 r5976046 analyser kit for r/g 6300/6400 and sim6 01122003.
1. Kit description 1. Kit description overview • introduction • kit content • domain of application 1.1 introduction analyzers in lcd projectors depending on the type of lcd projector the analyzers used may differ. The main differences reside in the mechanical mounting system and the material used, ...
1. Kit description some projector (rst version) are equipped with adapted analyzers, please contact barco always check the type of analyzer and the type of projector and make sure to order the right analyzer. 1.3 domain of application overview the analyzers handled in this manual are used in the fol...
2. Access to the analyzers 2. Access to the analyzers particularities depending on the projector the procedure to access the analyzers may be different. In the rsim6 projector the top cover can be removed without removing the lens whereas in the 6300/6400 projector the lens has to be removed to allo...
2. Access to the analyzers 2.2 removing the top cover location the top cover is located on the top side of the projector. Image 2-4 top cover location necessary tool • flat blade screwdriver 8 mm. Be sure the projector handle is in the inserted position when removing the top cover. How to remove the...
2. Access to the analyzers image 2-6 pull off the 3 rubber sealing pieces image 2-7 turn out the 3 screws 2.3 removing the emc plat how to remove the emc plate ? 1. Loosen the screw b retaining the electrical conductor. (image 2-8) 2. Turn out the screws a retaining the little plate 3. Remove the li...
2. Access to the analyzers image 2-8 image 2-9 be careful not to drop the screws into the projector. 8 r5976046 analyser kit for r/g 6300/6400 and sim6 01122003.
3. Replacing the analyzers 3. Replacing the analyzers overview • removing the analyzers • mounting the analyzers 3.1 removing the analyzers necessary tools • flat screwdriver • philips screwdriver how to remove the analyzers ? 1. Remove the power cable (1) (image 3-1) 2. Remove the flat cables (2), ...
3. Replacing the analyzers image 3-4 analyzer removal operations 3.2 mounting the analyzers how to mount the analyzers ? 1. To mount the analyzers proceed by reversing above procedure always mount with the reference dots oriented towards the outside of the assembly (towards the lcd driver) 10 r59760...
Index index a access 5 c content 3 d description 3 domain 4 e emc plate 7 i introduction 3 l lens 5 m mounting 10 r removal 9 replacement 9 t top cover 6 removing 6 r5976046 analyser kit for r/g 6300/6400 and sim6 01122003 11.
