Bc1305 rev# 1 bc1306 bc1307 bc1308 bench instructions.
Bench end abc-ssi1020 x3 seat slat x8 1/4" x 1.50" lag screw x24 f0002 required tools: -(1) screw gun -(1) 7/16" socket -(1) 8" - 10" post hole digger -(1) level 1/4" flat washer x24 f0001 required materials: -ready-to-mix concrete -loose gravel -wire & bracing material before installing bench, plea...
Seat slats spacing detail t f0002 f0001 pre-drilled pilot hole (back view) v 1/8" spacing 1 keep spacing between boards approximately 1/8". Repeat steps for remaining seat slats bench instructions 3/6.
26.00 in (8" - 10" diameter) 30.00 in 30.00 in 4.00 in loose gravel 2 using post hole digger, dig three holes as shown below. Then, fill in each hole with approximately 4" of loose gravel. Before installing bench, please check local codes to ensure proper installation. These instructions are a gener...
17" - 18" -carefully, place the bench into holes. Center each post in each hole and level bench. Also, be sure to check seat height to ensure comfortable seating. Secure placement of bench with bracing materials and fill in holes with ready-to-mix concrete. Allow to dry and remove bracing materials....
27.438 27.438 71.875 4.750 17.000 29 ground 10.750 1.500 14.375 3.500 9 30.976 19.382 construction materials: recycled plastic, powder coated steel hardware: stainless steel set post 24 to 26 inches into ground all dimensions shown in inches bc1305 bc1306 bc1307 bc1308 bench specifications.
